ADG432BR

90ns, 60ns SPST - NO 24Ohm Analog Switches BREAK-BEFORE-MAKE ADG432 16 Pins 250pA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG432BR
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 683
Description: 90ns, 60ns SPST - NO 24Ohm Analog Switches BREAK-BEFORE-MAKE ADG432 16 Pins 250pA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	24Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Subcategory	Multiplexer or Switches
Max Power Dissipation	7.7μW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	235
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	ADG432
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Number of Channels	4
Interface	Parallel
Max Supply Voltage	25V
Min Supply Voltage	5V
Power Dissipation	3.5μW
Max Supply Current	100nA
Throw Configuration	SPST
Turn On Delay Time	165 ns
Voltage - Supply, Single/Dual (±)	12V ±15V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	130 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	24Ohm
Min Dual Supply Voltage	13.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	9pF 9pF
On-state Resistance Match-Nom	0.85Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	90ns, 60ns
Charge Injection	5pC
Channel-to-Channel Matching (ΔRon)	1.2 Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	24Ohm
Normal Position	NO
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADG432BR Overview

The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 1:1. Operational temperature extended around -40°C~85°C TA. In total, there are 16 terminations. This electronic part offers high-quality output due to its 4 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. As part of its design, the 16 series is equipped with this electronic component. Multiplexers built on a SPST - NO switching circuit are built. Try searching for the analog switch ic with ADG432 if you are looking for variants. It has an internal resistance of 24Ohm. You can find the functions of the 16 pins in the datasheets. Theswitch device is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 25V. An effective Dual, Single supply digital multiplexer. A low voltage of 5V should be applied to the electronic component. It may damage the digital multiplexer if the voltage is higher than 100nA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 22V. For dual power supplies, a voltage of at least 13.5V should be attached. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. This electrical part is compatible with 12V operating voltages. The Drain to Source resistance of this electronic component is 24Ohm.