ADG432BR-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | COMMERCIAL |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 12V ±15V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 24Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| On-state Resistance Match-Nom | 0.85Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 90ns, 60ns |
| Charge Injection | 5pC |
| Channel-to-Channel Matching (ΔRon) | 1.2 Ω |
| Crosstalk | -85dB @ 1MHz |
| Switch-on Time-Max | 165ns |
| Switch-off Time-Max | 130ns |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
ADG432BR-REEL Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. This analog switch is mounted in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. 16 terminations have been made so far. A high-quality output is provided by the electrical component's 1 channels. With a 15V voltage supply, the electrical component should be turned on and run. A total of 16 pins are injected into the electrical part body. These analog multiplexers are built based on SPST - NO switching circuits. 4 circuits are used in this analogue multiplexer.
ADG432BR-REEL Features
1 Channels
Switch Circuit: SPST - NO
ADG432BR-REEL Applications
There are a lot of Rochester Electronics, LLC ADG432BR-REEL Analog Switches & Multiplexers ICs applications.
- Battery Powered Systems
- Fault Tolerant Systems
- Isolation
- Fiber to the Home
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Ultrasound
- Precision instrumentation
- Avionics
- ISDN NT1/TA
- PBXs
