Parameters |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
24Ohm |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
7.7μW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG432 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Operating Supply Voltage |
12V |
Number of Channels |
4 |
Interface |
Parallel |
Max Supply Voltage |
25V |
Min Supply Voltage |
5V |
Operating Supply Current |
100pA |
Power Dissipation |
3.5μW |
Max Supply Current |
100nA |
Throw Configuration |
SPST |
Turn On Delay Time |
165 ns |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
130 ns |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
24Ohm |
Min Dual Supply Voltage |
13.5V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
68 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
9pF 9pF |
On-state Resistance Match-Nom |
0.85Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
90ns, 60ns |
Charge Injection |
5pC |
Channel-to-Channel Matching (ΔRon) |
1.2 Ω |
Crosstalk |
-85dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Normal Position |
NO |
Voltage - Supply, Dual (V±) |
±15V |
Height Seated (Max) |
1.75mm |
Length |
9.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
ADG432BR-REEL Overview
Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, you'll find this switch device. 1:1 is the ratio of multiplexer to demultiplexer circuits. The operating temperature is extended to around -40°C~85°C TA. Totally, there are 16 terminations. High-quality output is provided by the electronic component's 4 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. Electronic part bodies are injected with 16 pins. Unlike digital switches, these are based on SPST - NO switching circuits. Using the ADG432 search parameter, you can discover variants of the switch. It has an internal resistance of 24Ohm. You can find the functions of the 16 pins in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 25V to the switch device in normal circumstances. The analog switch ic is of the Dual, Single supply type and is cost-effective. 5V is the lowest voltage the electrical component should receive. It would be sufficient to run this analogue multiplexer with 100pA current. If put voltage greater than 100nA on the device, damage may be caused to the analogue multiplexer. For this multiplexer, dual supply voltage is feasible, but it should not exceed 22V. In the case of dual power supplies, you should connect at least 13.5V. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. Operating voltages of 12V are compatible with the electrical part.
ADG432BR-REEL Features
4 Channels
Switch Circuit: SPST - NO
100pA Supply Current
ADG432BR-REEL Applications
There are a lot of Analog Devices Inc. ADG432BR-REEL Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- Frame Relay Equipment
- Digital cross connects (DSX-1)
- PDH Multiplexers
- Wireless Local Loop
- Private Branch Exchange (PBX)
- ISDN NT1/TA
- CSU
- High speed data transmission line cards
- Intelligent PBX