ADG433BNZ
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 24Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADG433 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 12V |
| Number of Channels | 4 |
| Max Supply Voltage | 25V |
| Power Dissipation | 470mW |
| Output Current | 30mA |
| Throw Configuration | SPST |
| Voltage - Supply, Single/Dual (±) | 12V ±15V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 24Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| On-state Resistance Match-Nom | 0.85Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 90ns, 60ns |
| Charge Injection | 5pC |
| Channel-to-Channel Matching (ΔRon) | 1.2 Ω |
| Crosstalk | -85dB @ 1MHz |
| Switch-off Time-Max | 130ns |
| Height | 3.3mm |
| Length | 20.07mm |
| Width | 6.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ADG433BNZ Overview
The electrical component comes in 16-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tube. In Through Hole, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there have been 16 terminations. The electronic part provides high-quality output because it has 4 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. Unlike digital switches, these are based on SPST - NO/NC switching circuits. Try searching with ADG433 to find analog multiplexer variants. Analog switches have 24Ohm internal resistance. You can find the functions of the 16 pins in the datasheets. normally, users should not supply switches with voltages higher than 25V. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. A voltage of 12V can be used to operate the electronic component.
ADG433BNZ Features
4 Channels
Switch Circuit: SPST - NO/NC
ADG433BNZ Applications
There are a lot of Analog Devices Inc. ADG433BNZ Analog Switches & Multiplexers ICs applications.
- Communication systems
- 65 V DACs
- Cellular phones
- Multiplexers
- Multi-Line E1 Interface Cards
- Fiber to the Home
- Low-Voltage
- Digital Cross-Connects
- Precision data acquisition
- Power routing
