Parameters |
Turn-Off Delay Time |
120 ns |
Max Dual Supply Voltage |
20V |
On-State Resistance (Max) |
12Ohm Typ |
Min Dual Supply Voltage |
3V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
72 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
13pF |
On-state Resistance Match-Nom |
1Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
70ns, 60ns (Typ) |
Charge Injection |
10pC |
Channel-to-Channel Matching (ΔRon) |
1 Ω |
Crosstalk |
-90dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Height Seated (Max) |
1.75mm |
Length |
9.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 4 weeks ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
12Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
5.3mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG436 |
Pin Count |
16 |
Number of Outputs |
4 |
Operating Supply Voltage |
12V |
Number of Channels |
2 |
Interface |
Parallel |
Max Supply Voltage |
30V |
Min Supply Voltage |
3V |
Test Frequency |
1MHz |
Operating Supply Current |
50μA |
Power Dissipation |
5.3mW |
Max Supply Current |
350μA |
Turn On Delay Time |
125 ns |
Voltage - Supply, Single/Dual (±) |
3V~30V ±3V~20V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
ADG436BRZ-REEL Overview
Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. The operating temperature is extended to around -40°C~85°C TA. A total of 16 terminations have been recorded. This electronic part offers high-quality output due to its 2 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. It is injected into the electrical part body with 16 pins. Based on SPDT switching circuits, these analog multiplexers work. Try searching for ADG436 variants of the analog switch ic. There is 12Ohm internal resistance in this digital multiplexer. For functions related to 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. normally, users should not supply switches with voltages higher than 30V. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended that the electrical component receives a voltage of 3V. This digital switch can be operated with a current of 50μA. Put voltage above 350μA on the multiplexer to cause damage. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. In the case of dual power supplies, you should connect at least 3V. 12V operating voltages can be used with this electrical part. A analog switch ics with 4 outputs is included.
ADG436BRZ-REEL Features
2 Channels
Switch Circuit: SPDT
50μA Supply Current
ADG436BRZ-REEL Applications
There are a lot of Analog Devices Inc. ADG436BRZ-REEL Analog Switches & Multiplexers ICs applications.
- PCMCIA cards
- Industrial
- Imaging
- PDAs
- Automotive applications
- Fiber to the Home
- Transmit
- Cable PC
- DSUs
- T1/E1 Terminals