ADG438FBR

230ns, 130ns 270Ohm Typ DUAL Analog Switches BREAK-BEFORE-MAKE ADG438 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG438FBR
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 873
Description: 230ns, 130ns 270Ohm Typ DUAL Analog Switches BREAK-BEFORE-MAKE ADG438 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	270Ohm
Additional Feature	FAULT PROTECTED; OVERVOLTAGE PROTECTION
Subcategory	Multiplexer or Switches
Max Power Dissipation	2.6mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	15V
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	ADG438
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	15V
Number of Channels	8
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	25V
Min Supply Voltage	-15V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	50μA
Power Dissipation	2.6mW
Max Supply Current	200μA
Throw Configuration	DPST
Propagation Delay	220 ns
Turn On Delay Time	230 ns
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	130 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	270Ohm Typ
High Level Output Current	20mA
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	93 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	3pF 22pF
On-state Resistance Match-Nom	8.1Ohm
Switch Time (Ton, Toff) (Max)	230ns, 130ns
Charge Injection	15pC
Channel-to-Channel Matching (ΔRon)	8.1 Ω
Crosstalk	-93dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	345ns
Voltage - Supply, Dual (V±)	±15V
Height	1.5mm
Length	10mm
Width	4mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADG438FBR Overview

Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tube. The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. An extended operating temperature of -40°C~125°C TA degrees Celsius. Totally, there are 16 terminations. As a result of its 8 channels, this electronic component provides high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. There are 16 pins injected into the electronic part body. There are 1 circuits in this switch device. Try searching for the analog switch ic with ADG438 if you are looking for variants. Analog switches have 270Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 25V. The lowest voltage fed to the electronic component should be -15V. The switch device would be able to operate with 50μA current. If you put voltage higher than 200μA on the digital multiplexer, damage may occur. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 22V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. Operating voltages of 15V are compatible with the electrical part. There is also FAULT PROTECTED; OVERVOLTAGE PROTECTION to look out for in this electronic part.