ADG438FBRZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 270Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 2.6mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG438 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 25V |
| Min Supply Voltage | 15V |
| Operating Supply Current | 50μA |
| Power Dissipation | 2.6mW |
| Max Supply Current | 200μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 250 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 150 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 270Ohm Typ |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 22pF |
| On-state Resistance Match-Nom | 8.1Ohm |
| Switch Time (Ton, Toff) (Max) | 230ns, 130ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 8.1 Ω |
| Crosstalk | -93dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 345ns |
| Signal Current-Max | 0.02A |
| Voltage - Supply, Dual (V±) | ±15V |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG438FBRZ-REEL Overview
Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 8:1. Extended operating temperature around -40°C~125°C TA. In total, 16 terminations have occurred. By its 8 channels, the electronic component provides high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. A total of 16 pins are injected into the electrical part body. The circuits in this analogue multiplexer number 1. Search with ADG438 if you are looking for analog multiplexer variants. As far as internal resistance is concerned, it has 270Ohm. The functions of 16 pins can be found in the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 25V. An effective Dual supply digital multiplexer. 15V is the lowest voltage the electrical component should receive. For this digital switch to work, 50μA current would suffice. Putting voltage greater than 200μA on the multiplexer may cause damage. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. In order to operate the 8 inputs, there are several steps to follow.
ADG438FBRZ-REEL Features
8 Channels
50μA Supply Current
ADG438FBRZ-REEL Applications
There are a lot of Analog Devices Inc. ADG438FBRZ-REEL Analog Switches & Multiplexers ICs applications.
- Cellular phones
- Multi-Line E1 Interface Cards
- CSU
- Fiber In The Loop (FITL)
- Audio and video routing
- RGB switches
- Signal routing between systems
- Residential Gateways, Home Gateway/Router
- SONET/SDH ADM
- Remote Powered Equipment
