ADG439FBR

230ns, 130ns SP4T 270Ohm Typ DUAL Analog Switches BREAK-BEFORE-MAKE ADG439 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG439FBR
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 384
Description: 230ns, 130ns SP4T 270Ohm Typ DUAL Analog Switches BREAK-BEFORE-MAKE ADG439 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	270Ohm
Additional Feature	FAULT PROTECTED; OVERVOLTAGE PROTECTION
Subcategory	Multiplexer or Switches
Max Power Dissipation	2.6mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	15V
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	ADG439
Pin Count	16
Qualification Status	Not Qualified
Number of Channels	4
Interface	Parallel
Number of Circuits	2
Max Supply Voltage	25V
Min Supply Voltage	15V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Power Dissipation	2.6mW
Max Supply Current	200μA
Throw Configuration	4PST
Turn On Delay Time	250 ns
Number of Inputs	8
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	270Ohm Typ
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	93 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	3pF 22pF
On-state Resistance Match-Nom	8.1Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	230ns, 130ns
Charge Injection	15pC
Channel-to-Channel Matching (ΔRon)	8.1 Ω
Crosstalk	-93dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	173ns
Voltage - Supply, Dual (V±)	±15V
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADG439FBR Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. Mounted in Surface Mount is this multiplexer. 4:1 is the ratio of multiplexer to demultiplexer circuits. The operating temperature is extended to around -40°C~125°C TA. Total terminations are 16. A 4 channel electronic part produces high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. A total of 16 pins are injected into the electrical part body. Unlike digital switches, these are based on SP4T switching circuits. There are 2 circuits in this switch device. ADG439 can be used to search for analog multiplexer variants. The internal resistance of this digital multiplexer is 270Ohm. Please refer to the datasheets for 16 pins functions. In this analog multiplexer, the value is Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 25V to the switch device in normal circumstances. In order for the electronic part to function properly, the lowest voltage should be 15V. When the digital multiplexer is charged above 200μA, damage can occur. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. Integrated with DIFFERENTIAL MULTIPLEXER analog IC. It is possible to operate 8 inputs. Additional features of the electronic component include: FAULT PROTECTED; OVERVOLTAGE PROTECTION.