ADG439FBRZ

230ns, 130ns SP4T 270Ohm Typ DUAL Analog Switches BREAK-BEFORE-MAKE ADG439 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG439FBRZ
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 247
Description: 230ns, 130ns SP4T 270Ohm Typ DUAL Analog Switches BREAK-BEFORE-MAKE ADG439 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	400Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	FAULT PROTECTED; OVERVOLTAGE PROTECTION
Subcategory	Multiplexer or Switches
Max Power Dissipation	2.6mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG439
Pin Count	16
Number of Channels	4
Interface	Parallel
Number of Circuits	2
Max Supply Voltage	25V
Min Supply Voltage	15V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Nominal Supply Current	50μA
Power Dissipation	2.6mW
Max Supply Current	200μA
Throw Configuration	4PST
Turn On Delay Time	250 ns
Number of Inputs	8
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	270Ohm Typ
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	93 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	3pF 22pF
On-state Resistance Match-Nom	8.1Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	230ns, 130ns
Charge Injection	15pC
Channel-to-Channel Matching (ΔRon)	8.1 Ω
Crosstalk	-93dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	345ns
Switch-off Time-Max	173ns
Drain to Source Resistance	400Ohm
Voltage - Supply, Dual (V±)	±15V
Height	1.5mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG439FBRZ Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tube is used. Surface Mount is where this multiplexer is located. 4:1 is the ratio between multiplexers and demultiplexers. Operation at a temperature around -40°C~125°C TA. The total number of terminations is 16. This electronic part offers high-quality output due to its 4 channels. A 15V voltage supply should turn on and run the electronic component. As part of the design of the 16 series, this electronic part has been incorporated into the system. A SP4T switching circuit is used for these analog switches. The circuits in this analogue multiplexer number 2. Look for analog switch ic variants by searching with ADG439. There is 400Ohm internal resistance in this digital multiplexer. Please refer to the datasheets for 16 pins functions. There is a standard Multiplexer or Switches analogue multiplexer here. In a normalsituation, users should not supply the switches with voltage higher than 25V. In order for the electronic part to function properly, the lowest voltage should be 15V. The analogue multiplexer may be damaged if voltage is greater than 200μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. It is possible to operate 8 inputs. Don't forget the additional features of this electronic part, such as: FAULT PROTECTED; OVERVOLTAGE PROTECTION. It has a Drain to Source resistance of 400Ohm ohms.