ADG441BR-REEL

110ns, 60ns SPST - NC 70Ohm Analog Switches BREAK-BEFORE-MAKE ADG441 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG441BR-REEL
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 233
Description: 110ns, 60ns SPST - NC 70Ohm Analog Switches BREAK-BEFORE-MAKE ADG441 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	4pF 4pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	110ns, 60ns
Charge Injection	1pC
Crosstalk	-100dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Voltage - Supply, Dual (V±)	±15V
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	70Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Additional Feature	CAN ALSO OPERATE WITH 12V SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.2mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG441
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Number of Channels	4
Interface	Parallel
Max Supply Voltage	25V
Min Supply Voltage	10.8V
Operating Supply Current	1nA
Power Dissipation	1.2mW
Max Supply Current	80μA
Throw Configuration	SPST
Turn On Delay Time	110 ns
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	60 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	70Ohm
Min Dual Supply Voltage	13.5V
Dual Supply Voltage	15V

ADG441BR-REEL Overview

Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 1:1. Operational temperature extended around -40°C~85°C TA. Total terminations are 16. Due to its 4 channels, the electrical component produces high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. Electronic part bodies are injected with 16 pins. On the other hand, analog switches can be constructed using SPST - NC switching circuits. Try searching with ADG441 if you're looking for variants. Analog switches have 70Ohm internal resistance. Please refer to the datasheets for 16 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. normally, users should not supply switches with voltages higher than 25V. An effective Dual, Single supply digital multiplexer. 10.8V should be the lowest voltage fed to the electronic component. The analogue multiplexer could operate on 1nA current. If you put voltage higher than 80μA on the digital multiplexer, damage may occur. For this switch, a dual supply voltage is feasible, but it must not exceed 22VA dual power supply should have at least 13.5V voltage attached. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. 12V operating voltages can be used with this electrical part. Additional features include: CAN ALSO OPERATE WITH 12V SUPPLY.