ADG441BRZ

110ns, 60ns SPST - NC 70Ohm Analog Switches BREAK-BEFORE-MAKE ADG441 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG441BRZ
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 324
Description: 110ns, 60ns SPST - NC 70Ohm Analog Switches BREAK-BEFORE-MAKE ADG441 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	70Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	600mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG441
Pin Count	16
Operating Supply Voltage	12V
Polarity	Inverting, Non-Inverting
Number of Channels	4
Interface	Parallel
Max Supply Voltage	25V
Min Supply Voltage	10.8V
Nominal Supply Current	80μA
Power Dissipation	1.2mW
Max Supply Current	80μA
Throw Configuration	SPST
Turn On Delay Time	110 ns
Voltage - Supply, Single/Dual (±)	12V ±15V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	60 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	70Ohm
Min Dual Supply Voltage	13.5V
High Level Output Current	30mA
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	4pF 4pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	110ns, 60ns
Charge Injection	1pC
Crosstalk	-100dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	40Ohm
Normal Position	NC
Height	1.5mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG441BRZ Overview

Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. The advanced packaging method Tube provides high reliability. Mounted in Surface Mount is this multiplexer. 1:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -40°C~85°C TA. Total terminations are 16. As a result of its 4 channels, this electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. There is an electrical component included in the 16 series. Multiplexers built on a SPST - NC switching circuit are built. Try searching with ADG441 if you're looking for variants. A 70Ohm internal resistance characterizes this multiplexer. You can find the functions of the 16 pins in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 25V to the switch device in normal circumstances. Analog switch ics with Dual, Single supply type are cost-effective. 10.8V is the lowest voltage that should be fed to the electronic electronic part. Put voltage above 80μA on the multiplexer to cause damage. There is no problem with using dual supply voltage, but it should not exceed 22V. The voltage should be at least 13.5V if you are using dual power supplies. There is a voltage range of 12V operating voltages for the electrical part. There is 40Ohm Drain to Source resistance on this electronic part.