ADG442BRZ-REEL

110ns, 60ns SPST - NO 70Ohm Analog Switches BREAK-BEFORE-MAKE ADG442 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG442BRZ-REEL
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 146
Description: 110ns, 60ns SPST - NO 70Ohm Analog Switches BREAK-BEFORE-MAKE ADG442 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	70Ohm
Additional Feature	CAN ALSO OPERATE WITH 12V SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.2mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG442
Pin Count	16
Operating Supply Voltage	12V
Polarity	Non-Inverting
Number of Channels	4
Interface	Parallel
Max Supply Voltage	25V
Min Supply Voltage	10.8V
Operating Supply Current	1nA
Nominal Supply Current	80μA
Power Dissipation	1.2mW
Max Supply Current	80μA
Throw Configuration	SPST
Turn On Delay Time	110 ns
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	60 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	70Ohm
Min Dual Supply Voltage	13.5V
High Level Output Current	30mA
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	4pF 4pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	110ns, 60ns
Charge Injection	1pC
Crosstalk	-100dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Voltage - Supply, Dual (V±)	±15V
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG442BRZ-REEL Overview

This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. In total, there have been 16 terminations. A high-quality output is provided by the electrical component's 4 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. An electrical component of this type can be found in the 16 series. These analog multiplexers are built based on SPST - NO switching circuits. Try searching for ADG442 variants of the analog switch ic. The internal resistance of this digital multiplexer is 70Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. This switch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 25V to a switch device. Digital switch that provides Dual, Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 10.8V. An operating current of 1nA would be sufficient for this switch device. The switch multiplexer may be damaged if it is exposed to voltage greater than 80μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 22V. For dual power supplies, a voltage of at least 13.5V should be attached. The electrical part can be operated at 12V voltage levels. This electronic part has additional features, such as: CAN ALSO OPERATE WITH 12V SUPPLY.