ADG444ABRZ
| Parameters | |
|---|---|
| Resistance | 70Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG444 |
| Pin Count | 16 |
| Operating Supply Voltage | 12V |
| Number of Channels | 1 |
| Max Supply Voltage | 25V |
| Power Dissipation | 1.2mW |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 12V ±15V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 70Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 4pF 4pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 110ns, 60ns |
| Charge Injection | 1pC |
| Crosstalk | -100dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 110ns |
| Switch-off Time-Max | 60ns |
| Normal Position | NC |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
ADG444ABRZ Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have the same number of circuits 1:1. Operational temperature extended around -40°C~85°C TA. In total, there have been 16 terminations. The electronic part provides high-quality output because it has 1 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. It is injected into the electrical part body with 16 pins. Based on SPST - NC switching circuits, these analog multiplexers work. Using the ADG444 search parameter, you can discover variants of the switch. As far as internal resistance is concerned, it has 70Ohm. For details about the functions of 16 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. In normalcircumstances, users should not exceed 25V volts for the multiplexer. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 22V. A voltage of 12V can be used to operate the electronic component. In order to operate the 4 inputs, there are several steps to follow.
ADG444ABRZ Features
1 Channels
Switch Circuit: SPST - NC
ADG444ABRZ Applications
There are a lot of Analog Devices Inc. ADG444ABRZ Analog Switches & Multiplexers ICs applications.
- Frame Relay Equipment
- Fiber to the Home
- DSLAMs
- Video signal routing
- Access Concentrators
- RGB switches
- Wireless Local Loop
- ISDN NT1/TA
- Cellular phones
- Imaging
