ADG451BN

180ns, 140ns SPST - NC 5Ohm Analog Switches BREAK-BEFORE-MAKE ADG451 16 Pins 500pA 5V 16-DIP (0.300, 7.62mm)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG451BN
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 632
Description: 180ns, 140ns SPST - NC 5Ohm Analog Switches BREAK-BEFORE-MAKE ADG451 16 Pins 500pA 5V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	5Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Additional Feature	ALSO OPERATE WITH 12V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	17.5μW
Technology	CMOS
Number of Functions	4
Supply Voltage	5V
Base Part Number	ADG451
Output	SEPARATE OUTPUT
Pin Count	16
Number of Channels	4
Max Supply Voltage	12V
Min Supply Voltage	5V
Power Dissipation	17.5μW
Max Supply Current	500nA
Throw Configuration	SPST
Turn On Delay Time	180 ns
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	140 ns
Max Dual Supply Voltage	15V
On-State Resistance (Max)	5Ohm
Min Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	65 dB
Neg Supply Voltage-Max (Vsup)	-20V
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	37pF 37pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	180ns, 140ns
Charge Injection	20pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	220ns
Drain to Source Resistance	4mOhm
Normal Position	NC
Voltage - Supply, Dual (V±)	±4.5V~20V
Height Seated (Max)	5.33mm
Length	20.07mm
Width	7.62mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADG451BN Overview

This electronic part is conveniently packaged in 16-DIP (0.300, 7.62mm), making it easy to ship abroad. A high level of reliability can be achieved through the use of an advanced packaging method Tube. A switch device like this is mounted in Through Hole. Multiplexers and demultiplexers have the same number of circuits 1:1. Temperatures around -40°C~85°C TA are extended for operation. In total, there have been 16 terminations. The electronic part provides high-quality output because it has 4 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. It is part of the design of the 16 series that this electronic component is included. On the other hand, analog switches can be constructed using SPST - NC switching circuits. Try searching for ADG451 variants of the analog switch ic. A 5Ohm internal resistance characterizes this multiplexer. You can find the functions of the 16 pins in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. normally, users should not supply switches with voltages higher than 12V. The digital multiplexer has a low cost Dual, Single supply. 5V is the lowest voltage that should be fed to the electronic electronic part. The switch multiplexer may be damaged if it is exposed to voltage greater than 500nA. Despite this switch device's dual supply capability, its voltage should not exceed 15V. If you are using dual power supplies, you should attach at least 5V. There are SEPARATE OUTPUT outputs on this analog switch ic. This electrical component also includes additional features such as ALSO OPERATE WITH 12V SINGLE SUPPLY. The Drain to Source resistance of this electronic component is 4mOhm.