ADG451BR

180ns, 140ns SPST - NC 5Ohm Analog Switches BREAK-BEFORE-MAKE ADG451 16 Pins 500pA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG451BR
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 371
Description: 180ns, 140ns SPST - NC 5Ohm Analog Switches BREAK-BEFORE-MAKE ADG451 16 Pins 500pA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	5Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Additional Feature	ALSO OPERATE WITH 12V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	17.5μW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	235
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	ADG451
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Number of Channels	4
Interface	Parallel
Max Supply Voltage	12V
Min Supply Voltage	5V
Power Dissipation	17.5μW
Max Supply Current	500nA
Throw Configuration	SPST
Turn On Delay Time	180 ns
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	140 ns
Max Dual Supply Voltage	15V
On-State Resistance (Max)	5Ohm
Min Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	65 dB
Neg Supply Voltage-Max (Vsup)	-20V
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	37pF 37pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	180ns, 140ns
Charge Injection	20pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	220ns
Drain to Source Resistance	4mOhm
Normal Position	NC
Voltage - Supply, Dual (V±)	±4.5V~20V
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADG451BR Overview

The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 1:1. Extended operating temperature around -40°C~85°C TA. In total, 16 terminations have occurred. The electronic part provides high-quality output because it has 4 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. As part of the design of the 16 series, this electronic part has been incorporated into the system. SPST - NC switching circuits are used in these analog switch ics. Search with ADG451 if you are looking for analog multiplexer variants. This digital multiplexer has 5Ohm internal resistance. Datasheets for functions of 16 pins are available. There is a standard Multiplexer or Switches analogue multiplexer here. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. An effective Dual, Single supply digital multiplexer. 5V should be the lowest voltage fed to the electronic component. When the digital multiplexer is charged above 500nA, damage can occur. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 15V. For dual power supplies, a voltage of at least 5V should be attached. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. This electronic part has additional features, such as: ALSO OPERATE WITH 12V SINGLE SUPPLY. A Drain to Source resistance of 4mOhm is shown for this electronic part.