ADG451BRUZ

180ns, 140ns SPST - NC 5Ohm Analog Switches BREAK-BEFORE-MAKE ADG451 16 Pins 500pA 5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG451BRUZ
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 358
Description: 180ns, 140ns SPST - NC 5Ohm Analog Switches BREAK-BEFORE-MAKE ADG451 16 Pins 500pA 5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	5Ohm
Additional Feature	ALSO OPERATE WITH 12V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	450mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG451
Pin Count	16
Operating Supply Voltage	9V
Polarity	Inverting, Non-Inverting
Number of Channels	4
Interface	Parallel
Max Supply Voltage	12V
Min Supply Voltage	5V
Operating Supply Current	100pA
Power Dissipation	17.5μW
Max Supply Current	500nA
Throw Configuration	SPST
Turn On Delay Time	180 ns
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	140 ns
Max Dual Supply Voltage	15V
On-State Resistance (Max)	5Ohm
Min Dual Supply Voltage	5V
High Level Output Current	100mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	65 dB
Neg Supply Voltage-Max (Vsup)	-20V
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	37pF 37pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	180ns, 140ns
Charge Injection	20pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	220ns
Drain to Source Resistance	4Ohm
Normal Position	NC
Voltage - Supply, Dual (V±)	±4.5V~20V
Height	1.05mm
Length	5mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG451BRUZ Overview

Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Surface Mount, this analog switch is mounted. 1:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -40°C~85°C TA. In total, 16 terminations have occurred. The electronic part provides high-quality output because it has 4 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. An injection of 16 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPST - NC switching circuits. Search with ADG451 if you are looking for analog multiplexer variants. This digital multiplexer has 5Ohm internal resistance. Datasheets for 16 pin functions are available upon request. There is a standard Multiplexer or Switches analogue multiplexer here. Multiplexers should not be powered above 12V in normal situations. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 5V should be the lowest voltage fed to the electronic component. In order to operate this switch device, it would need a current of 100pA. The analogue multiplexer may be damaged if voltage is greater than 500nA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 15V. It is recommended that you attach at least 5V to your dual power supply. 9V operating voltages can be used with this electrical part. Don’t miss additional features of the electronic component such as: ALSO OPERATE WITH 12V SINGLE SUPPLY. It has a Drain to Source resistance of 4Ohm ohms.