ADG451BRZ-REEL

180ns, 140ns SPST - NC 5Ohm Analog Switches BREAK-BEFORE-MAKE ADG451 16 Pins 500pA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG451BRZ-REEL
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 438
Description: 180ns, 140ns SPST - NC 5Ohm Analog Switches BREAK-BEFORE-MAKE ADG451 16 Pins 500pA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Operating Supply Current	100pA
Power Dissipation	17.5μW
Max Supply Current	500nA
Throw Configuration	SPST
Turn On Delay Time	180 ns
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	140 ns
Max Dual Supply Voltage	15V
On-State Resistance (Max)	5Ohm
Min Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	65 dB
Neg Supply Voltage-Max (Vsup)	-20V
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	37pF 37pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	180ns, 140ns
Charge Injection	20pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	220ns
Normal Position	NC
Voltage - Supply, Dual (V±)	±4.5V~20V
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	5Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	ALSO OPERATE WITH 12V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	17.5μW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG451
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Number of Channels	4
Interface	Parallel
Max Supply Voltage	12V
Min Supply Voltage	5V

ADG451BRZ-REEL Overview

Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. In total, there have been 16 terminations. The electronic part delivers high-quality output through its 4 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. There is an electrical component included in the 16 series. SPST - NC switching circuits are used in these analog switch ics. Look for analog switch ic variants by searching with ADG451. There is 5Ohm internal resistance in this digital multiplexer. You can find the functions of the 16 pins in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. normally, users should not supply switches with voltages higher than 12V. An effective Dual, Single supply digital multiplexer. There should be 5V voltage fed to the electrical part below 5V. The analogue multiplexer could operate on 100pA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 500nA. For this switch, a dual supply voltage is feasible, but it must not exceed 15VIf you are using dual power supplies, you should attach at least 5V. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. Check out the electrical component's additional features, such as the following: ALSO OPERATE WITH 12V SINGLE SUPPLY.