banner_page

ADG452BR

180ns, 140ns SPST - NO 5Ohm Analog Switches BREAK-BEFORE-MAKE ADG452 16 Pins 500pA 5V 16-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADG452BR
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 426
  • Description: 180ns, 140ns SPST - NO 5Ohm Analog Switches BREAK-BEFORE-MAKE ADG452 16 Pins 500pA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Normal Position NO
Voltage - Supply, Dual (V±) ±4.5V~20V
Height 1.5mm
Length 10mm
Width 4mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Operating Temperature -40°C~85°C TA
Packaging Tube
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 5Ohm
Terminal Finish Tin/Lead (Sn85Pb15)
Additional Feature ALSO OPERATE WITH 12V SINGLE SUPPLY
Subcategory Multiplexer or Switches
Max Power Dissipation 17.5μW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 1.27mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number ADG452
Pin Count 16
Operating Supply Voltage 9V
Polarity Non-Inverting
Number of Channels 4
Interface Parallel
Max Supply Voltage 12V
Min Supply Voltage 5V
Operating Supply Current 100pA
Power Dissipation 17.5μW
Max Supply Current 500nA
Throw Configuration SPST
Turn On Delay Time 180 ns
Supply Type Dual, Single
Neg Supply Voltage-Nom (Vsup) -5V
Turn-Off Delay Time 140 ns
Max Dual Supply Voltage 15V
On-State Resistance (Max) 5Ohm
Min Dual Supply Voltage 5V
High Level Output Current 100mA
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 65 dB
Neg Supply Voltage-Max (Vsup) -20V
Current - Leakage (IS(off)) (Max) 500pA
Channel Capacitance (CS(off), CD(off)) 37pF 37pF
On-state Resistance Match-Nom 0.3Ohm
Switch Circuit SPST - NO
Switch Time (Ton, Toff) (Max) 180ns, 140ns
Charge Injection 20pC
Channel-to-Channel Matching (ΔRon) 100m Ω
Crosstalk -90dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 220ns

ADG452BR Overview


The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. This high-reliability packaging method uses advanced packaging methods Tube. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a ratio of 1:1. The operating temperature is extended to around -40°C~85°C TA. In total, there have been 16 terminations. A high-quality output is provided by the electrical component's 4 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. The electrical component body receives 16 pins. On the other hand, analog switches can be constructed using SPST - NO switching circuits. If you are looking for variants of the digital switch, trying search with ADG452. The internal resistance of this digital multiplexer is 5Ohm. The datasheets for the 16 pins explain the functions. There is a standard Multiplexer or Switches analogue multiplexer here. In a normalsituation, users should not supply the switches with voltage higher than 12V. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage fed to the electronic component should be 5V. An operating current of 100pA would be sufficient for this switch device. When the digital multiplexer is charged above 500nA, damage can occur. For this switch, a dual supply voltage is feasible, but it must not exceed 15VWhen using dual power supplies, you should attach at least 5V. Operating voltages of 9V are compatible with the electrical part. Additional features include: ALSO OPERATE WITH 12V SINGLE SUPPLY.

ADG452BR Features


4 Channels
Switch Circuit: SPST - NO
100pA Supply Current
Additional Features: ALSO OPERATE WITH 12V SINGLE SUPPLY

ADG452BR Applications


There are a lot of Analog Devices Inc. ADG452BR Analog Switches & Multiplexers ICs applications.

  • PDH Multiplexers
  • Automatic test equipment
  • 65 V DACs
  • Voice over IP/DSL – Integrated Access Devices, Smart
  • Multiplexers
  • Industrial control systems
  • Remote wireless modules
  • Power routing
  • Microwave transmission systems
  • DSLAMs

Write a review

Note: HTML is not translated!
    Bad           Good