banner_page

ADG452BRUZ

180ns, 140ns SPST - NO 5Ohm Analog Switches BREAK-BEFORE-MAKE ADG452 16 Pins 500pA 5V 16-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADG452BRUZ
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 975
  • Description: 180ns, 140ns SPST - NO 5Ohm Analog Switches BREAK-BEFORE-MAKE ADG452 16 Pins 500pA 5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Operating Temperature -40°C~85°C TA
Packaging Tube
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 5Ohm
Additional Feature ALSO OPERATE WITH 12V SINGLE SUPPLY
Subcategory Multiplexer or Switches
Max Power Dissipation 450mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number ADG452
Pin Count 16
Operating Supply Voltage 9V
Polarity Non-Inverting
Number of Channels 4
Interface Parallel
Max Supply Voltage 12V
Min Supply Voltage 5V
Nominal Supply Current 100pA
Power Dissipation 17.5μW
Max Supply Current 500nA
Throw Configuration SPST
Turn On Delay Time 180 ns
Supply Type Dual, Single
Neg Supply Voltage-Nom (Vsup) -5V
Turn-Off Delay Time 140 ns
Max Dual Supply Voltage 15V
On-State Resistance (Max) 5Ohm
Min Dual Supply Voltage 5V
High Level Output Current 100mA
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 65 dB
Neg Supply Voltage-Max (Vsup) -20V
Current - Leakage (IS(off)) (Max) 500pA
Channel Capacitance (CS(off), CD(off)) 37pF 37pF
On-state Resistance Match-Nom 0.3Ohm
Switch Circuit SPST - NO
Switch Time (Ton, Toff) (Max) 180ns, 140ns
Charge Injection 20pC
Channel-to-Channel Matching (ΔRon) 100m Ω
Crosstalk -90dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 220ns
Max Junction Temperature (Tj) 150°C
Drain to Source Resistance 4Ohm
Normal Position NO
Voltage - Supply, Dual (V±) ±4.5V~20V
Height 1.2mm
Length 5mm
Width 4.4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

ADG452BRUZ Overview


Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around -40°C~85°C TA. There are 16 terminations totally. High-quality output is provided by the electronic component's 4 channels. With a 5V voltage supply, the electrical component should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Using the ADG452 search parameter, you can discover variants of the switch. This digital multiplexer has 5Ohm internal resistance. Datasheets for functions of 16 pins are available. In this analog multiplexer, the value is Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 12V. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended that the electrical component receives a voltage of 5V. When the digital multiplexer is charged above 500nA, damage can occur. Despite this switch's dual supply capability, its voltage should not exceed 15V. When using dual power supplies, you should attach at least 5V. There is a voltage range of 9V operating voltages for the electrical part. This electrical component also includes additional features such as ALSO OPERATE WITH 12V SINGLE SUPPLY. There is 4Ohm resistance between the Drain and Source on this part.

ADG452BRUZ Features


4 Channels
Switch Circuit: SPST - NO
Additional Features: ALSO OPERATE WITH 12V SINGLE SUPPLY
Drain-to-Source resistance: 4Ohm

ADG452BRUZ Applications


There are a lot of Analog Devices Inc. ADG452BRUZ Analog Switches & Multiplexers ICs applications.

  • Fiber to the Home
  • Ultrasound
  • Communication systems
  • Power routing
  • Multi-Line E1 Interface Cards
  • Imaging
  • Audio signal routing
  • T1/E1 Terminals
  • HDTV
  • Existing multiplexer applications (both fault-protected and nonfault-protected)

Write a review

Note: HTML is not translated!
    Bad           Good