ADG453BNZ
| Parameters | |
|---|---|
| Neg Supply Voltage-Max (Vsup) | -20V |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 37pF 37pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 180ns, 140ns |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 220ns |
| Voltage - Supply, Dual (V±) | ±4.5V~20V |
| Height | 3.3mm |
| Length | 20.07mm |
| Width | 6.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Resistance | 5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATE WITH 12V SINGLE SUPPLY |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADG453 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 9V |
| Number of Channels | 4 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 5V |
| Power Dissipation | 470mW |
| Throw Configuration | SPST |
| Turn On Delay Time | 70 ns |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 60 ns |
| Max Dual Supply Voltage | 15V |
| On-State Resistance (Max) | 5Ohm |
| Min Dual Supply Voltage | 5V |
| Dual Supply Voltage | 9V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 65 dB |
ADG453BNZ Overview
Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Through Hole, you'll find this switch device. 1:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. There are 16 terminations totally. As a result of its 4 channels, this electronic component provides high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. An electrical component of this type can be found in the 16 series. SPST - NO/NC switching circuits are used in these analog switch ics. Try searching with ADG453 to find analog multiplexer variants. In this multiplexer, the internal resistance is 5Ohm. Datasheets for functions of 16 pins are available. There is Multiplexer or Switches analog multiplexer like this in the world. Users should never supply a voltage higher than 12V to a switch device. It is recommended to use 5V as the lowest voltage for the electrical part. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 15V. With dual power supplies, you should attach at least 5V. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. This electrical part is compatible with 9V operating voltages. This electronic part has additional features, such as: ALSO OPERATE WITH 12V SINGLE SUPPLY.
ADG453BNZ Features
4 Channels
Switch Circuit: SPST - NO/NC
Additional Features: ALSO OPERATE WITH 12V SINGLE SUPPLY
ADG453BNZ Applications
There are a lot of Analog Devices Inc. ADG453BNZ Analog Switches & Multiplexers ICs applications.
- 65 V DACs
- HDTV
- Low-Voltage
- PDH Multiplexers
- Cell phones
- Medical
- Video switching
- Automatic test equipment
- Precision data acquisition
- Industrial
