Parameters |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
5Ohm |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Additional Feature |
ALSO OPERATE WITH 12V SINGLE SUPPLY |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
17.5μW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG453 |
Pin Count |
16 |
Operating Supply Voltage |
9V |
Polarity |
Non-Inverting |
Number of Channels |
4 |
Interface |
Parallel |
Max Supply Voltage |
12V |
Min Supply Voltage |
5V |
Power Dissipation |
17.5μW |
Max Supply Current |
500nA |
Throw Configuration |
SPST |
Turn On Delay Time |
180 ns |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
140 ns |
Max Dual Supply Voltage |
15V |
On-State Resistance (Max) |
5Ohm |
Min Dual Supply Voltage |
5V |
High Level Output Current |
100mA |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
65 dB |
Neg Supply Voltage-Max (Vsup) |
-20V |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
37pF 37pF |
On-state Resistance Match-Nom |
0.3Ohm |
Switch Circuit |
SPST - NO/NC |
Switch Time (Ton, Toff) (Max) |
180ns, 140ns |
Charge Injection |
20pC |
Channel-to-Channel Matching (ΔRon) |
100m Ω |
Crosstalk |
-90dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
220ns |
Voltage - Supply, Dual (V±) |
±4.5V~20V |
Height Seated (Max) |
1.75mm |
Length |
9.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
ADG453BR Overview
This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. Advanced packaging method Tube is used to provide high reliability. There is an analog multiplexer mounted in position Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. The operating temperature is extended to around -40°C~85°C TA. 16 terminations have been made so far. This electronic part offers high-quality output due to its 4 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. This electronic part can be found in the 16 series. On the other hand, analog switches can be constructed using SPST - NO/NC switching circuits. ADG453 can be used to search for analog multiplexer variants. It has an internal resistance of 5Ohm. For details about the functions of 16 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. normally, users should not supply switches with voltages higher than 12V. Analog switch ics with Dual, Single supply type are cost-effective. There should be 5V voltage fed to the electrical part below 5V. The switch multiplexer may be damaged if it is exposed to voltage greater than 500nA. Despite this switch's dual supply capability, its voltage should not exceed 15V. A dual power supply should have at least 5V voltage attached. The electrical part can be operated at 9V voltage levels. Additional features of the electronic component include: ALSO OPERATE WITH 12V SINGLE SUPPLY.
ADG453BR Features
4 Channels
Switch Circuit: SPST - NO/NC
Additional Features: ALSO OPERATE WITH 12V SINGLE SUPPLY
ADG453BR Applications
There are a lot of Analog Devices Inc. ADG453BR Analog Switches & Multiplexers ICs applications.
- Audio/video switches
- Digital cross connects (DSX-1)
- FTTH
- Cell phones
- T1/E1 Terminals
- Communication systems
- PCMCIA cards
- Automatic test equipment
- E1 Multiplexer
- Fiber to the Home