ADG453BR-REEL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 5Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | ALSO OPERATE WITH 12V SINGLE SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG453 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 9V |
| Number of Channels | 4 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 5V |
| Power Dissipation | 600mW |
| Throw Configuration | SPST |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 15V |
| On-State Resistance (Max) | 5Ohm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 65 dB |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 37pF 37pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 180ns, 140ns |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 220ns |
| Voltage - Supply, Dual (V±) | ±4.5V~20V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
ADG453BR-REEL Overview
This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. High reliability is provided by advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operating temperature around -40°C~85°C TA extended. The total number of terminations is 16. Due to its 4 channels, the electrical component produces high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPST - NO/NC switching circuits. Using the ADG453 search parameter, you can discover variants of the switch. A 5Ohm internal resistance characterizes this multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. This switch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 12V in normal situations. 5V is the lowest voltage that should be fed to the electronic electronic part. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 15V. With dual power supplies, you should attach at least 5V. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. There is a voltage range of 9V operating voltages for the electrical part. Additional features of the electronic component include: ALSO OPERATE WITH 12V SINGLE SUPPLY.
ADG453BR-REEL Features
4 Channels
Switch Circuit: SPST - NO/NC
Additional Features: ALSO OPERATE WITH 12V SINGLE SUPPLY
ADG453BR-REEL Applications
There are a lot of Analog Devices Inc. ADG453BR-REEL Analog Switches & Multiplexers ICs applications.
- PDH Multiplexers
- Mechanical reed relay replacement
- Sample hold systems
- Communication systems
- Relay replacements
- Fiber In The Loop (FITL)
- MP3 players
- Frame Relay Equipment
- T1/E1 Terminals
- Medical
