ADG453BR-REEL7

180ns, 140ns SPST - NO/NC 5Ohm Analog Switches BREAK-BEFORE-MAKE ADG453 16 Pins 500pA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG453BR-REEL7
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 278
Description: 180ns, 140ns SPST - NO/NC 5Ohm Analog Switches BREAK-BEFORE-MAKE ADG453 16 Pins 500pA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG453
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	9V
Number of Channels	4
Interface	Parallel
Max Supply Voltage	12V
Min Supply Voltage	5V
Operating Supply Current	100pA
Power Dissipation	17.5μW
Max Supply Current	500nA
Throw Configuration	SPST
Turn On Delay Time	180 ns
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	140 ns
Max Dual Supply Voltage	15V
On-State Resistance (Max)	5Ohm
Min Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	65 dB
Neg Supply Voltage-Max (Vsup)	-20V
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	37pF 37pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	180ns, 140ns
Charge Injection	20pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	220ns
Voltage - Supply, Dual (V±)	±4.5V~20V
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	5Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Additional Feature	ALSO OPERATE WITH 12V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	17.5μW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm

ADG453BR-REEL7 Overview

Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -40°C~85°C TA extended. The total number of terminations is 16. A electrical component with 4 channels is capable of high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. Into the electrical component body are injected 16 pins. A SPST - NO/NC switching circuit is used to build these analog multiplexers. Try searching for ADG453 variants of the analog switch ic. It has an internal resistance of 5Ohm. The functions of 16 pins can be found in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Multiplexers should not be powered above 12V in normal situations. A cost-effective Dual, Single supply type analogue multiplexer. There should be 5V voltage fed to the electrical part below 5V. An operating current of 100pA would be sufficient for this switch device. Put voltage above 500nA on the multiplexer to cause damage. Despite this switch's dual supply capability, its voltage should not exceed 15V. If you are using dual power supplies, you should attach at least 5V. This analog switch ic utilizes SEPARATE OUTPUT output. The electronic component can function from 9V. Additional features of the electronic component include: ALSO OPERATE WITH 12V SINGLE SUPPLY.