ADG4612BCPZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad, CSP |
| Number of Pins | 16 |
| Supplier Device Package | 16-LFCSP-WQ (3x3) |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Resistance | 6.1Ohm |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 7.2mW |
| Base Part Number | ADG4612 |
| Number of Outputs | 4 |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 4 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 3V |
| Test Frequency | 1MHz |
| Power Dissipation | 7.2mW |
| Max Supply Current | 140μA |
| Turn On Delay Time | 125 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±3V~5.5V |
| Supply Type | Dual, Single |
| Bandwidth | 250MHz |
| Turn-Off Delay Time | 125 ns |
| Max Dual Supply Voltage | 5.5V |
| -3db Bandwidth | 250MHz |
| On-State Resistance (Max) | 5.1Ohm |
| Min Dual Supply Voltage | 3V |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 11.5pF 11.5pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 73ns, 91ns |
| Insertion Loss (dB) | -0.27 dB |
| Charge Injection | 292pC |
| Channel-to-Channel Matching (ΔRon) | 50mOhm |
| Crosstalk | -74dB @ 1MHz |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG4612BCPZ-REEL7 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-WFQFN Exposed Pad, CSP. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -40°C~105°C TA extended. The electronic part delivers high-quality output through its 4 channels. A SPST - NO switching circuit is used for these analog switches. A total of 4 circuits make up this switch device. Using the ADG4612 search parameter, you can discover variants of the switch. There is 6.1Ohm internal resistance in this digital multiplexer. For functions related to 16 pins, please refer to the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 12V. Digital switch that provides Dual, Single power at a cost-effective price. The lowest voltage fed to the electronic component should be 3V. A digital multiplexer may suffer damage if voltage is applied above 140μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 5.5V. You should attach at least 3V voltage if you are using dual power supply. Among the inputs that can be operated are the 4 inputs. In 250MHz-bandwidths, data can be transferred. A temperature above 105°C is not suitable for operation of the analogue multiplexer. This digital multiplexer has 4 outputs. There is a 16-LFCSP-WQ (3x3) package available from suppliers.
ADG4612BCPZ-REEL7 Features
4 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 250MHz
Bandwidth: 250MHz
ADG4612BCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG4612BCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- PBXs
- Digital cross connects (DSX-1)
- Channelized and Unchannelized DS3 applications
- Voice over IP/DSL – Integrated Access Devices, Smart
- RGB switches
- USB 1.1 signal switching circuits
- Public switching systems
- HDTV
- Access Concentrators
- Private Branch Exchange (PBX)
