ADG4612BRUZ

73ns, 91ns SPST - NO 5.1Ohm Analog Switches MAKE-BEFORE-BREAK ADG4612 16 Pins 10nA 5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG4612BRUZ
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 540
Description: 73ns, 91ns SPST - NO 5.1Ohm Analog Switches MAKE-BEFORE-BREAK ADG4612 16 Pins 10nA 5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~105°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	5.1Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	7.2mW
Technology	CMOS
Terminal Form	GULL WING
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	ADG4612
Output	SEPARATE OUTPUT
Pin Count	16
Polarity	Non-Inverting
Number of Channels	1
Interface	Parallel
Max Supply Voltage	12V
Min Supply Voltage	3V
Test Frequency	1MHz
Power Dissipation	7.2mW
Max Supply Current	140μA
Turn On Delay Time	125 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	3V~12V ±3V~5.5V
Supply Type	Dual, Single
Bandwidth	250MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	125 ns
Max Dual Supply Voltage	5.5V
On-State Resistance (Max)	5.1Ohm
Min Dual Supply Voltage	3V
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	54 dB
Current - Leakage (IS(off)) (Max)	10nA
Channel Capacitance (CS(off), CD(off))	11.5pF 11.5pF
On-state Resistance Match-Nom	0.05Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	73ns, 91ns
Insertion Loss (dB)	-0.27 dB
Charge Injection	292pC
Channel-to-Channel Matching (ΔRon)	50m Ω
Crosstalk	-74dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Normal Position	NO
Signal Current-Max	0.35A
Height	1.2mm
Length	5.1mm
Width	4.5mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG4612BRUZ Overview

The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tube. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 1:1. Around -40°C~105°C TA is the extended operating temperature. Total terminations are 16. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. A total of 16 pins are injected into the body of the electronic part. Unlike digital switches, these are based on SPST - NO switching circuits. Using the ADG4612 search parameter, you can discover variants of the switch. A 5.1Ohm internal resistance characterizes this multiplexer. The functions of 16 pins can be found in the datasheets. Theswitch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 12V. A cost-effective Dual, Single supply type analogue multiplexer. 3V should be the lowest voltage fed to the electronic component. The analogue multiplexer may be damaged if voltage is greater than 140μA. Despite this switch's dual supply capability, its voltage should not exceed 5.5V. The voltage should be at least 3V if you are using dual power supplies. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. There are 4 inputs to be operated. A 250MHz-bandwidth can be used for data transfer.