ADG4613BCPZ-REEL7

73ns, 91ns SPST - NO/NC 5.1Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG4613 16 Pins 10nA 5V 16-WFQFN Exposed Pad, CSP

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG4613BCPZ-REEL7
Package: 16-WFQFN Exposed Pad, CSP
Datasheet: PDF
Stock: 640
Description: 73ns, 91ns SPST - NO/NC 5.1Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG4613 16 Pins 10nA 5V 16-WFQFN Exposed Pad, CSP(Kg)

Details

Tags

Parameters
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~105°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
ECCN Code	EAR99
Resistance	6.1Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	7.2mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	ADG4613
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Polarity	Non-Inverting
Number of Channels	1
Interface	Parallel
Max Supply Voltage	12V
Min Supply Voltage	3V
Test Frequency	1MHz
Power Dissipation	7.2mW
Max Supply Current	140μA
Turn On Delay Time	125 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	3V~12V ±3V~5.5V
Supply Type	Dual, Single
Bandwidth	250MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	125 ns
Max Dual Supply Voltage	5.5V
On-State Resistance (Max)	5.1Ohm
Min Dual Supply Voltage	3V
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	54 dB
Current - Leakage (IS(off)) (Max)	10nA
Channel Capacitance (CS(off), CD(off))	11.5pF 11.5pF
On-state Resistance Match-Nom	0.05Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	73ns, 91ns
Insertion Loss (dB)	-0.27 dB
Charge Injection	292pC
Channel-to-Channel Matching (ΔRon)	50m Ω
Crosstalk	-74dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	6.1Ohm
Signal Current-Max	0.35A
Height Seated (Max)	0.8mm
Length	3mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-WFQFN Exposed Pad, CSP

ADG4613BCPZ-REEL7 Overview

Packed in 16-WFQFN Exposed Pad, CSP, the electronic component is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. There is an analog multiplexer mounted in position Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -40°C~105°C TA. In total, there are 16 terminations. A high-quality output is provided by the electrical component's 1 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. A SPST - NO/NC switching circuit is used for these analog switches. Look for analog switch ic variants by searching with ADG4613. The internal resistance of this digital multiplexer is 6.1Ohm. Please refer to the datasheets for 16 pins functions. Theswitch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 12V. Analog switch ics with Dual, Single supply type are cost-effective. There should be 3V voltage fed to the electrical part below 3V. The switch multiplexer may be damaged if it is exposed to voltage greater than 140μA. For this switch, a dual supply voltage is feasible, but it must not exceed 5.5VYou should attach at least 3V voltage if you are using dual power supply. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. The 4 inputs need to be operated in order to work. There are 250MHz bandwidths for data transfer. It has a Drain to Source resistance of 6.1Ohm ohms.