ADG506AKPZ

300ns, 300ns 300Ohm QUAD Analog Switches ADG506 28 Pins 1nA 15V 28-LCC (J-Lead)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG506AKPZ
Package: 28-LCC (J-Lead)
Datasheet: PDF
Stock: 604
Description: 300ns, 300ns 300Ohm QUAD Analog Switches ADG506 28 Pins 1nA 15V 28-LCC (J-Lead)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	28-LCC (J-Lead)
Surface Mount	YES
Number of Pins	28
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	28
ECCN Code	EAR99
Resistance	300Ohm
Max Power Dissipation	470mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG506
Pin Count	28
Number of Channels	16
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	16.5V
Min Supply Voltage	10.8V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Nominal Supply Current	600μA
Power Dissipation	10mW
Propagation Delay	300 ns
Turn On Delay Time	600 ns
Number of Inputs	16
Voltage - Supply, Single/Dual (±)	10.8V~16.5V ±10.8V~16.5V
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	600 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	300Ohm
Min Dual Supply Voltage	10.8V
High Level Output Current	20mA
Multiplexer/Demultiplexer Circuit	16:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	5pF 44pF
On-state Resistance Match-Nom	22.5Ohm
Switch Time (Ton, Toff) (Max)	300ns, 300ns
Charge Injection	4pC
Channel-to-Channel Matching (ΔRon)	15 Ω
Drain to Source Resistance	280Ohm
Height	3.94mm
Length	11.58mm
Width	11.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG506AKPZ Overview

The electrical component comes in 28-LCC (J-Lead) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. A switch device like this is mounted in Surface Mount. 16:1 is the ratio between multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. A total of 28 terminations have been recorded. This electronic part offers high-quality output due to its 16 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. An electrical component like this is included in the 28 series. A total of 1 circuits make up this switch device. Try searching for ADG506 variants of the analog switch ic. The internal resistance of this digital multiplexer is 300Ohm. Please refer to the datasheets for 28 pins functions. Multiplexers should not be powered above 16.5V in normal situations. It is recommended to use 10.8V as the lowest voltage for the electrical part. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 16.5V. The voltage should be at least 10.8V if you are using dual power supplies. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board. In order to operate the 16 inputs, there are several steps to follow. It has a Drain to Source resistance of 280Ohm ohms.