ADG506AKR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Qualification Status | Not Qualified |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±10.8V~16.5V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 300Ohm |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 44pF |
| On-state Resistance Match-Nom | 22.5Ohm |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 15 Ω |
| Switch-on Time-Max | 300ns |
| Switch-off Time-Max | 300ns |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
ADG506AKR Overview
Shipping overseas is convenient with the electronic component packed in 28-SOIC (0.295, 7.50mm Width). High reliability is achieved by using advanced packaging method Tube. In Surface Mount, this analog switch is mounted. 16:1 is the ratio between multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. In total, there have been 28 terminations. This electronic part offers high-quality output due to its 16 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. An electrical component of this type can be found in the 28 series. A 1 circuit is present in this switch device. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board.
ADG506AKR Features
16 Channels
ADG506AKR Applications
There are a lot of Rochester Electronics, LLC ADG506AKR Analog Switches & Multiplexers ICs applications.
- PBX interfaces
- Communications systems
- Signal routing between systems
- Ultrasound
- Battery Powered Instruments
- ISDN NT1/TA
- Channelized and Unchannelized DS3 applications
- PDH Multiplexers
- PBXs
- Multi-Line E1 Interface Cards
