ADG506AKR
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Resistance | 300Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG506 |
| Pin Count | 28 |
| Number of Channels | 16 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 600μA |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 10mW |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 450 ns |
| Number of Inputs | 16 |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±10.8V~16.5V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 450 ns |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 300Ohm |
| Min Dual Supply Voltage | 10.8V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 44pF |
| On-state Resistance Match-Nom | 22.5Ohm |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 15 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Drain to Source Resistance | 280Ohm |
| Signal Current-Max | 0.02A |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
ADG506AKR Overview
As the electronic part is packed in 28-SOIC (0.295, 7.50mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tube. Mounted in Surface Mount is this multiplexer. The ratio between the number of multiplexer and demultiplexer circuits is 16:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. Totally, there are 28 terminations. The electronic part provides high-quality output because it has 16 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. There are 28 pins injected into the electronic part body. A 1 circuit is present in this switch device. Use ADG506 to search for variants of the digital switches. It has an internal resistance of 300Ohm. Please refer to the datasheets for 28 pins functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 16.5V in normal situations. It is recommended to use 10.8V as the lowest voltage for the electrical part. For this multiplexer to operate, 600μA current would be sufficient. Despite this switch device's dual supply capability, its voltage should not exceed 16.5V. If you are using a dual power supply, you should attach at least 10.8V. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. It is possible to operate 16 inputs. Drain to Source resistance is 280Ohm.
ADG506AKR Features
16 Channels
600μA Supply Current
Drain-to-Source resistance: 280Ohm
ADG506AKR Applications
There are a lot of Analog Devices Inc. ADG506AKR Analog Switches & Multiplexers ICs applications.
- SONET
- USB 1.1 signal switching circuits
- Ultrasound
- Cross Connects
- Industrial control systems
- DSUs
- Imaging
- Access Concentrators
- Relay replacements
- New designs requiring multiplexer functions
