ADG506AKR-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 300Ohm |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG506 |
| Pin Count | 28 |
| Operating Supply Voltage | 15V |
| Number of Channels | 16 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Operating Supply Current | 600nA |
| Power Dissipation | 10mW |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 450 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 16 |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±10.8V~16.5V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 450 ns |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 300Ohm |
| Min Dual Supply Voltage | 10.8V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 44pF |
| On-state Resistance Match-Nom | 22.5Ohm |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 15 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG506AKR-REEL Overview
The electrical component comes in 28-SOIC (0.295, 7.50mm Width) packaging, which makes it convenient to ship overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 16:1. Increasing operating temperature to around -40°C~85°C TA. Total terminations are 28. By its 16 channels, the electronic component provides high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. A key feature of the 28 series is the inclusion of this electronic part as part of its design. There are 1 circuits in this multiplexer. Try searching with ADG506 to find analog multiplexer variants. Internally, this switch multiplexer has a resistance of 300Ohm. You can find the functions of the 28 pins in the datasheets. In normalcircumstances, users should not exceed 16.5V volts for the multiplexer. The digital multiplexer has a low cost Dual, Single supply. 10.8V is the lowest voltage the electrical component should receive. This digital switch can be operated with a current of 600nA. Despite this switch's dual supply capability, its voltage should not exceed 16.5V. If you are using a dual power supply, you should attach at least 10.8V. 15V operating voltages can be used with this electrical part. In order to operate the 16 inputs, there are several steps to follow.
ADG506AKR-REEL Features
16 Channels
600nA Supply Current
ADG506AKR-REEL Applications
There are a lot of Analog Devices Inc. ADG506AKR-REEL Analog Switches & Multiplexers ICs applications.
- Relay Replacement
- Audio and video signal routing
- Avionics
- Cell phones
- Switching Systems
- Cross Connects
- Battery Powered Systems
- Residential Gateways, Home Gateway/Router
- Public switching systems
- Relay replacements
