ADG506AKRZ

300ns, 300ns 300Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG506 28 Pins 1nA 15V 28-SOIC (0.295, 7.50mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG506AKRZ
Package: 28-SOIC (0.295, 7.50mm Width)
Datasheet: PDF
Stock: 609
Description: 300ns, 300ns 300Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG506 28 Pins 1nA 15V 28-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	28-SOIC (0.295, 7.50mm Width)
Surface Mount	YES
Number of Pins	28
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
ECCN Code	EAR99
Resistance	700Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	470mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG506
Pin Count	28
Number of Channels	16
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	16.5V
Min Supply Voltage	10.8V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	600μA
Nominal Supply Current	1.5mA
Power Dissipation	10mW
Max Supply Current	1.5mA
Propagation Delay	300 ns
Turn On Delay Time	600 ns
Number of Inputs	16
Voltage - Supply, Single/Dual (±)	10.8V~16.5V ±10.8V~16.5V
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	600 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	300Ohm
Min Dual Supply Voltage	10.8V
High Level Output Current	20mA
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	16:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	5pF 44pF
On-state Resistance Match-Nom	22.5Ohm
Switch Time (Ton, Toff) (Max)	300ns, 300ns
Charge Injection	4pC
Channel-to-Channel Matching (ΔRon)	15 Ω
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.02A
Height	2.35mm
Length	18.1mm
Width	7.6mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG506AKRZ Overview

As the electronic part is packed in 28-SOIC (0.295, 7.50mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tube. Mounted in Surface Mount is this multiplexer. Multiplexer and demultiplexer circuits have a number 16:1. Operational temperature extended around -40°C~85°C TA. Total terminations are 28. A high-quality output is provided by the electrical component's 16 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. Into the electrical component body are injected 28 pins. A total of 1 circuits make up this switch device. ADG506 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 700Ohm. The datasheets for the 28 pins explain the functions. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 16.5V. The lowest voltage fed to the electronic component should be 10.8V. In order to operate this switch device, it would need a current of 600μA. The analogue multiplexer may be damaged if voltage is greater than 1.5mA. Despite this switch's dual supply capability, its voltage should not exceed 16.5V. If you are using dual power supplies, you should attach at least 10.8V. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. There are 16 inputs to be operated.