Parameters |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 week ago) |
Mounting Type |
Through Hole |
Package / Case |
28-CDIP (0.600, 15.24mm) |
Surface Mount |
NO |
Number of Pins |
28 |
Operating Temperature |
-55°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
28 |
ECCN Code |
EAR99 |
Resistance |
700Ohm |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
470mW |
Technology |
CMOS |
Number of Functions |
1 |
Supply Voltage |
15V |
Terminal Pitch |
2.54mm |
Base Part Number |
ADG506 |
Pin Count |
28 |
Operating Supply Voltage |
15V |
Number of Channels |
16 |
Interface |
Parallel |
Number of Circuits |
1 |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
10.8V |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Nominal Supply Current |
1.5mA |
Power Dissipation |
10mW |
Propagation Delay |
300 ns |
Turn On Delay Time |
450 ns |
Number of Inputs |
16 |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
450 ns |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
300Ohm |
Min Dual Supply Voltage |
10.8V |
Screening Level |
MIL-STD-883 Class B |
Multiplexer/Demultiplexer Circuit |
16:1 |
Off-state Isolation-Nom |
68 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
5pF 44pF |
On-state Resistance Match-Nom |
22.5Ohm |
Switch Time (Ton, Toff) (Max) |
300ns, 300ns |
Charge Injection |
4pC |
Channel-to-Channel Matching (ΔRon) |
15 Ω (Typ) |
Switching |
BREAK-BEFORE-MAKE |
Voltage - Supply, Single (V+) |
10.8V~16.5V |
Signal Current-Max |
0.03A |
Height Seated (Max) |
5.59mm |
Radiation Hardening |
No |
ADG506ATQ/883B Overview
Shipping overseas is convenient due to the electrical component's packing in 28-CDIP (0.600, 15.24mm). The advanced packaging method Tube provides high reliability. Through Hole is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 16:1. Operating temperature extended to -55°C~125°C. In total, there have been 28 terminations. As a result of its 16 channels, this electronic component provides high-quality output. A 15V voltage supply should turn on and run the electronic component. As part of its design, the 28 series is equipped with this electronic component. The multiplexer consists of 1 circuits. Using the ADG506 search parameter, you can discover variants of the switch. As far as internal resistance is concerned, it has 700Ohm. For functions related to 28 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 16.5V volts for the multiplexer. The analog switch ic is of the Dual, Single supply type and is cost-effective. 10.8V is the lowest voltage that should be fed to the electronic electronic part. The voltage required by this switch device is 10.8V~16.5V, draining from a single voltage supply. Despite this switch device's dual supply capability, its voltage should not exceed 16.5V. A dual power supply should have at least 10.8V voltage attached. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board. It can operate from 15V operating voltages. Operating the 16 inputs requires 16 inputs.
ADG506ATQ/883B Features
16 Channels
ADG506ATQ/883B Applications
There are a lot of Analog Devices Inc. ADG506ATQ/883B Analog Switches & Multiplexers ICs applications.
- Microprocessor controlled systems
- Digital cross connects (DSX-1)
- Battery-powered systems
- Power routing
- Mechanical reed relay replacement
- Private Branch Exchange (PBX)
- Audio and video routing
- Communications systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Intelligent PBX