Parameters |
Mounting Type |
Through Hole |
Package / Case |
28-CDIP (0.600, 15.24mm) |
Surface Mount |
NO |
Number of Pins |
28 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e0 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
28 |
ECCN Code |
EAR99 |
Resistance |
300Ohm |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
15V |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
ADG507 |
Pin Count |
28 |
Number of Outputs |
2 |
Qualification Status |
Not Qualified |
Number of Channels |
8 |
Number of Circuits |
1 |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
10.8V |
Analog IC - Other Type |
DIFFERENTIAL MULTIPLEXER |
Power Dissipation |
470mW |
Number of Inputs |
16 |
Voltage - Supply, Single/Dual (±) |
10.8V~16.5V ±10.8V~16.5V |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
300Ohm |
Min Dual Supply Voltage |
10.8V |
Multiplexer/Demultiplexer Circuit |
16:1 |
Off-state Isolation-Nom |
68 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
5pF 44pF |
On-state Resistance Match-Nom |
22.5Ohm |
Switch Time (Ton, Toff) (Max) |
300ns, 300ns |
Charge Injection |
4pC |
Channel-to-Channel Matching (ΔRon) |
15 Ω |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
300ns |
Switch-off Time-Max |
300ns |
Height Seated (Max) |
5.59mm |
RoHS Status |
Non-RoHS Compliant |
ADG507ABQ Overview
Packed in 28-CDIP (0.600, 15.24mm), the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tube. Through Hole is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 16:1. Operating temperature extended to -40°C~85°C TA. There are 28 terminations totally. A electrical component with 8 channels is capable of high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. An electrical component like this is included in the 28 series. There are 1 circuits in this multiplexer. Try searching for the analog switch ic with ADG507 if you are looking for variants. This digital multiplexer has 300Ohm internal resistance. The datasheets for the 28 pins explain the functions. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 16.5V to a switch device. There should be 10.8V voltage fed to the electrical part below 10.8V. For this switch, a dual supply voltage is feasible, but it must not exceed 16.5VIf you are using a dual power supply, you should attach at least 10.8V. Integrated with DIFFERENTIAL MULTIPLEXER analog IC. Operating 16 inputs is required. An output of 2 is provided by the digital multiplexer.
ADG507ABQ Features
8 Channels
ADG507ABQ Applications
There are a lot of Analog Devices Inc. ADG507ABQ Analog Switches & Multiplexers ICs applications.
- Cell phones
- PCMCIA cards
- DVD-R
- Precision data acquisition
- Central office
- Communications systems
- Communication systems
- Communication systems
- Access Concentrators
- Data Acquisition Systems