ADG507AKN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Pin Count | 28 |
| Qualification Status | COMMERCIAL |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±10.8V~16.5V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 300Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 22pF |
| On-state Resistance Match-Nom | 22.5Ohm |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 15 Ω |
| Switch-on Time-Max | 300ns |
| Switch-off Time-Max | 300ns |
| Height Seated (Max) | 5.08mm |
| Length | 36.705mm |
| RoHS Status | Non-RoHS Compliant |
ADG507AKN Overview
As the electronic part is packed in 28-DIP (0.600, 15.24mm), international shipping is convenient. Advanced packaging method Tube is used to provide high reliability. Multiplexers like this are mounted in the Through Hole position. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Extended operating temperature around -40°C~85°C TA. Totally, there are 28 terminations. The electronic part provides high-quality output because it has 8 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. 28 pins are injected to the electronic part body. Circuits number 2 make up this analogue multiplexer. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC.
ADG507AKN Features
8 Channels
ADG507AKN Applications
There are a lot of Rochester Electronics, LLC ADG507AKN Analog Switches & Multiplexers ICs applications.
- PDAs
- Ultrasound
- Wireless Local Loop
- Low-Voltage
- SONET
- Multi-Line E1 Interface Cards
- DSLAMs
- Fiber In The Loop (FITL)
- Imaging
- Communication systems
