banner_page

ADG507AKNZ

300ns, 300ns 300Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG507 28 Pins 1nA 15V 28-DIP (0.600, 15.24mm)


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADG507AKNZ
  • Package: 28-DIP (0.600, 15.24mm)
  • Datasheet: PDF
  • Stock: 181
  • Description: 300ns, 300ns 300Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG507 28 Pins 1nA 15V 28-DIP (0.600, 15.24mm)(Kg)

Details

Tags

Parameters
Voltage - Supply, Single/Dual (±) 10.8V~16.5V ±10.8V~16.5V
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 600 ns
Max Dual Supply Voltage 16.5V
On-State Resistance (Max) 300Ohm
Min Dual Supply Voltage 10.8V
High Level Output Current 20mA
Dual Supply Voltage 15V
Multiplexer/Demultiplexer Circuit 8:1
Off-state Isolation-Nom 68 dB
Current - Leakage (IS(off)) (Max) 1nA
Channel Capacitance (CS(off), CD(off)) 5pF 22pF
On-state Resistance Match-Nom 22.5Ohm
Switch Time (Ton, Toff) (Max) 300ns, 300ns
Charge Injection 4pC
Channel-to-Channel Matching (ΔRon) 15 Ω
Switching BREAK-BEFORE-MAKE
Drain to Source Resistance 280Ohm
Height 4.95mm
Length 39.75mm
Width 14.73mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 3 months ago)
Mounting Type Through Hole
Package / Case 28-DIP (0.600, 15.24mm)
Surface Mount NO
Number of Pins 28
Operating Temperature -40°C~85°C TA
Packaging Tube
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 28
ECCN Code EAR99
Resistance 700Ohm
Terminal Finish Matte Tin (Sn)
Subcategory Multiplexer or Switches
Max Power Dissipation 470mW
Technology CMOS
Terminal Position DUAL
Number of Functions 1
Supply Voltage 15V
Base Part Number ADG507
Pin Count 28
Number of Channels 8
Interface Parallel
Number of Circuits 2
Max Supply Voltage 16.5V
Min Supply Voltage 10.8V
Analog IC - Other Type DIFFERENTIAL MULTIPLEXER
Operating Supply Current 600μA
Nominal Supply Current 1.5mA
Power Dissipation 28mW
Max Supply Current 1.5mA
Propagation Delay 300 ns
Turn On Delay Time 600 ns
Number of Inputs 16

ADG507AKNZ Overview


Due to its 28-DIP (0.600, 15.24mm) packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tube. There is an analog multiplexer mounted in position Through Hole. 8:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -40°C~85°C TA. In total, there have been 28 terminations. By its 8 channels, the electronic component provides high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. A total of 28 pins are injected into the electrical part body. A 2 circuit is present in this switch device. Try searching for the analog switch ic with ADG507 if you are looking for variants. The internal resistance of this digital multiplexer is 700Ohm. The functions of 28 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Users should never supply a voltage higher than 16.5V to a switch device. There should be 10.8V voltage fed to the electrical part below 10.8V. The switch device would be able to operate with 600μA current. A digital multiplexer may suffer damage if voltage is applied above 1.5mA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 16.5V. With dual power supplies, you should attach at least 10.8V. An analog IC with the number DIFFERENTIAL MULTIPLEXER is integrated into this board. It is possible to operate 16 inputs. A Drain to Source resistance of 280Ohm is shown for this electronic part.

ADG507AKNZ Features


8 Channels
600μA Supply Current
Drain-to-Source resistance: 280Ohm

ADG507AKNZ Applications


There are a lot of Analog Devices Inc. ADG507AKNZ Analog Switches & Multiplexers ICs applications.

  • Video signal routing
  • Multiplexers
  • Medical systems
  • PDH Multiplexers
  • E1 Multiplexer
  • E1 Network Equipment
  • DVD-R
  • High speed data transmission line cards
  • Fiber In The Loop (FITL)
  • T1/E1 Terminals

Write a review

Note: HTML is not translated!
    Bad           Good