ADG507AKP

300ns, 300ns 300Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG507 28 Pins 1nA 15V 28-LCC (J-Lead)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG507AKP
Package: 28-LCC (J-Lead)
Datasheet: PDF
Stock: 162
Description: 300ns, 300ns 300Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG507 28 Pins 1nA 15V 28-LCC (J-Lead)(Kg)

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	28-LCC (J-Lead)
Surface Mount	YES
Number of Pins	28
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
ECCN Code	EAR99
Resistance	700Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	470mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	225
Number of Functions	1
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG507
Pin Count	28
Operating Supply Voltage	15V
Number of Channels	1
Interface	Parallel
Number of Circuits	2
Max Supply Voltage	16.5V
Min Supply Voltage	10.8V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	1.5mA
Nominal Supply Current	1.5mA
Power Dissipation	28mW
Max Supply Current	1.5mA
Propagation Delay	300 ns
Turn On Delay Time	450 ns
Number of Inputs	16
Voltage - Supply, Single/Dual (±)	10.8V~16.5V ±10.8V~16.5V
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	450 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	300Ohm
Min Dual Supply Voltage	10.8V
High Level Output Current	20mA
Dual Supply Voltage	12V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	5pF 22pF
On-state Resistance Match-Nom	22.5Ohm
Switch Time (Ton, Toff) (Max)	300ns, 300ns
Charge Injection	4pC
Channel-to-Channel Matching (ΔRon)	15 Ω
Switching	BREAK-BEFORE-MAKE
Height	3.94mm
Length	11.58mm
Width	11.58mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADG507AKP Overview

This electronic part is conveniently packaged in 28-LCC (J-Lead), making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 8:1. Increasing operating temperature to around -40°C~85°C TA. There are 28 terminations totally. A electrical component with 1 channels is capable of high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. It is part of the design of the 28 series that this electronic component is included. The circuits in this analogue multiplexer number 2. Try searching with ADG507 to find analog multiplexer variants. The internal resistance of this digital multiplexer is 700Ohm. To find out what the functions of 28 pins are, please refer to their datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Users should never supply a voltage higher than 16.5V to a switch device. 10.8V is the lowest voltage the electrical component should receive. For this digital switch to work, 1.5mA current would suffice. Putting voltage greater than 1.5mA on the multiplexer may cause damage. For this multiplexer, dual supply voltage is feasible, but it should not exceed 16.5V. For dual power supplies, a voltage of at least 10.8V should be attached. Integrated with DIFFERENTIAL MULTIPLEXER analog IC. Operating voltages of 15V are compatible with the electrical part. The electrical component supports 16 inputs.