ADG507AKR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Resistance | 300Ohm |
| Max Power Dissipation | 470mW |
| Base Part Number | ADG507 |
| Pin Count | 28 |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Interface | Parallel |
| Number of Circuits | 2 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 28mW |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 450 ns |
| Number of Inputs | 16 |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±10.8V~16.5V |
| Turn-Off Delay Time | 450 ns |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 300Ohm |
| Min Dual Supply Voltage | 10.8V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 22pF |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 15 Ω |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG507AKR Overview
Shipping overseas is convenient with the electronic component packed in 28-SOIC (0.295, 7.50mm Width). High reliability is achieved by using advanced packaging method Tube. Mounted in Surface Mount is this multiplexer. There is 8:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. As a result of its 1 channels, this electronic component provides high-quality output. There is an electrical component included in the 28 series. 2 circuits are used in this analogue multiplexer. Use ADG507 to search for variants of the digital switches. An switch multiplexer with 300Ohm internal resistance has a value of 300Ohm. The datasheets for the 28 pins explain the functions. normally, users should not supply switches with voltages higher than 16.5V. 10.8V should be the lowest voltage fed to the electronic component. The analogue multiplexer could operate on 1.5mA current. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 16.5V. In the case of dual power supplies, you should connect at least 10.8V. There is a voltage range of 15V operating voltages for the electrical part. It is possible to operate 16 inputs.
ADG507AKR Features
1 Channels
1.5mA Supply Current
ADG507AKR Applications
There are a lot of Analog Devices Inc. ADG507AKR Analog Switches & Multiplexers ICs applications.
- Avionics and Military Systems
- Industrial
- Data switching
- PCMCIA cards
- High speed data transmission line cards
- PDH Multiplexers
- Cellular phones
- Routers
- ATM
- Audio and video signal routing
