Parameters |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
Mounting Type |
Surface Mount |
Package / Case |
28-SOIC (0.295, 7.50mm Width) |
Number of Pins |
28 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
ECCN Code |
EAR99 |
Resistance |
300Ohm |
Max Power Dissipation |
470mW |
Base Part Number |
ADG507 |
Pin Count |
28 |
Operating Supply Voltage |
15V |
Number of Channels |
1 |
Interface |
Parallel |
Number of Circuits |
2 |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
10.8V |
Operating Supply Current |
600nA |
Nominal Supply Current |
1.5mA |
Power Dissipation |
28mW |
Propagation Delay |
300 ns |
Turn On Delay Time |
450 ns |
Logic Function |
Multiplexer |
Number of Inputs |
16 |
Voltage - Supply, Single/Dual (±) |
10.8V~16.5V ±10.8V~16.5V |
Supply Type |
Dual, Single |
Turn-Off Delay Time |
450 ns |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
300Ohm |
Min Dual Supply Voltage |
10.8V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
5pF 22pF |
Switch Time (Ton, Toff) (Max) |
300ns, 300ns |
Charge Injection |
4pC |
Channel-to-Channel Matching (ΔRon) |
15 Ω |
ADG507AKR-REEL7 Overview
As the electronic part is packed in 28-SOIC (0.295, 7.50mm Width), international shipping is convenient. The advanced packaging method Tape & Reel (TR) provides high reliability. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 8:1. Extended operating temperature around -40°C~85°C TA. The electronic part delivers high-quality output through its 1 channels. A total of 28 pins are injected into the electrical part body. It consists of 2 circuits. Try searching for ADG507 variants of the analog switch ic. In this multiplexer, the internal resistance is 300Ohm. For details about the functions of 28 pins, please refer to the datasheets. Multiplexers should not be powered above 16.5V in normal situations. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 10.8V. This multiplexer would work with 600nA current. For this switch, a dual supply voltage is feasible, but it must not exceed 16.5VFor dual power supplies, a voltage of at least 10.8V should be attached. It can operate from 15V operating voltages. It is possible to operate 16 inputs.
ADG507AKR-REEL7 Features
1 Channels
600nA Supply Current
ADG507AKR-REEL7 Applications
There are a lot of Analog Devices Inc. ADG507AKR-REEL7 Analog Switches & Multiplexers ICs applications.
- Communication systems
- Central office
- Switching Systems
- Medical
- Digital Cross-Connects
- DSLAMs
- E1 Network Equipment
- Microprocessor controlled systems
- Ultrasound
- SDH