ADG507AKRZ
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 700Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG507 |
| Pin Count | 28 |
| Number of Channels | 1 |
| Interface | Parallel |
| Number of Circuits | 2 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 600μA |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 28mW |
| Max Supply Current | 1.5mA |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 600 ns |
| Number of Inputs | 16 |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±10.8V~16.5V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 600 ns |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 300Ohm |
| Min Dual Supply Voltage | 10.8V |
| High Level Output Current | 20mA |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 22pF |
| On-state Resistance Match-Nom | 22.5Ohm |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 15 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Height | 2.35mm |
| Length | 18.1mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
ADG507AKRZ Overview
The electronic component is convenient to ship overseas because it is packed in a 28-SOIC (0.295, 7.50mm Width). High reliability is provided by advanced packaging method Tube. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a number of circuits 8:1. Operating temperature extended to -40°C~85°C TA. Totally, there are 28 terminations. High-quality output is provided by the electronic component's 1 channels. A 15V voltage supply should turn on and run the electronic component. It is part of the design of the 28 series that this electronic component is included. It consists of 2 circuits. Try searching with ADG507 to find analog multiplexer variants. A 700Ohm internal resistance characterizes this multiplexer. To find out what the 28 pins do, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 16.5V to the switch device in normal circumstances. There should be 10.8V voltage fed to the electrical part below 10.8V. For this multiplexer to operate, 600μA current would be sufficient. Putting voltage greater than 1.5mA on the multiplexer may cause damage. For this switch, a dual supply voltage is feasible, but it must not exceed 16.5VIf you are using a dual power supply, you should attach at least 10.8V. A DIFFERENTIAL MULTIPLEXER analog IC is integrated into the board. The 16 inputs need to be operated in order to work.
ADG507AKRZ Features
1 Channels
600μA Supply Current
ADG507AKRZ Applications
There are a lot of Analog Devices Inc. ADG507AKRZ Analog Switches & Multiplexers ICs applications.
- Communications systems
- CSU
- Digital access cross connects
- T1/E1 Terminals
- Avionics
- Battery Powered Systems
- Automatic test equipment
- Ultrasound
- Transmit
- Industrial control systems
