ADG507AKRZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 300Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG507 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Interface | Parallel |
| Number of Circuits | 2 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Operating Supply Current | 600nA |
| Power Dissipation | 28mW |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 450 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±10.8V~16.5V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 450 ns |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 300Ohm |
| Min Dual Supply Voltage | 10.8V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 22pF |
| On-state Resistance Match-Nom | 14Ohm |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 15 Ω |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG507AKRZ-REEL7 Overview
The electrical component comes in 28-SOIC (0.295, 7.50mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 8:1. Operational temperature extended around -40°C~85°C TA. Total terminations are 28. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. A total of 28 pins are injected into the electrical part body. There are 2 circuits in this switch device. Try searching with ADG507 if you're looking for variants. A 300Ohm internal resistance characterizes this multiplexer. Datasheets for functions of 28 pins are available. Multiplexers should not be powered above 16.5V in normal situations. Digital switch that provides Dual, Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 10.8V. An operating current of 600nA would be sufficient for this switch device. Despite this switch device's dual supply capability, its voltage should not exceed 16.5V. With dual power supplies, you should attach at least 10.8V. A voltage of 15V can be used to operate the electronic component.
ADG507AKRZ-REEL7 Features
1 Channels
600nA Supply Current
ADG507AKRZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG507AKRZ-REEL7 Analog Switches & Multiplexers ICs applications.
- SDH
- Video switching
- 65 V DACs
- Multi-Line E1 Interface Cards
- Battery Powered Systems
- Digital cross connects (DSX-1)
- DSLAMs
- Wireless Local Loop
- Avionics
- Cable PC
