banner_page

ADG507ATE

300ns, 300ns 300Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG507 28 Pins 1nA 15V 28-CLCC


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADG507ATE
  • Package: 28-CLCC
  • Datasheet: PDF
  • Stock: 576
  • Description: 300ns, 300ns 300Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG507 28 Pins 1nA 15V 28-CLCC(Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 28-CLCC
Surface Mount YES
Number of Pins 28
Operating Temperature -55°C~125°C TA
Packaging Tube
JESD-609 Code e0
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 28
ECCN Code EAR99
Resistance 300Ohm
Terminal Finish TIN LEAD
Subcategory Multiplexer or Switches
Max Power Dissipation 28mW
Technology CMOS
Terminal Position QUAD
Peak Reflow Temperature (Cel) 220
Number of Functions 1
Supply Voltage 15V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number ADG507
Pin Count 28
Number of Channels 1
Number of Circuits 2
Max Supply Voltage 16.5V
Min Supply Voltage 10.8V
Analog IC - Other Type DIFFERENTIAL MULTIPLEXER
Power Dissipation 470mW
Number of Inputs 16
Voltage - Supply, Single/Dual (±) 10.8V~16.5V ±10.8V~16.5V
Neg Supply Voltage-Nom (Vsup) -15V
Max Dual Supply Voltage 16.5V
On-State Resistance (Max) 300Ohm
Min Dual Supply Voltage 10.8V
Multiplexer/Demultiplexer Circuit 8:1
Off-state Isolation-Nom 68 dB
Current - Leakage (IS(off)) (Max) 1nA
Channel Capacitance (CS(off), CD(off)) 5pF 22pF
On-state Resistance Match-Nom 22.5Ohm
Switch Time (Ton, Toff) (Max) 300ns, 300ns
Charge Injection 4pC
Channel-to-Channel Matching (ΔRon) 15 Ω
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 300ns
Switch-off Time-Max 300ns
Height 2.54mm
Width 11.63mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant

ADG507ATE Overview


The electronic part can be shipped overseas conveniently because it is packaged in 28-CLCC. A high level of reliability can be achieved through the use of an advanced packaging method Tube. Mounted in Surface Mount is this multiplexer. 8:1 is the ratio between multiplexers and demultiplexers. Increasing operating temperature to around -55°C~125°C TA. There are 28 terminations totally. This electronic part offers high-quality output due to its 1 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. A total of 28 pins are injected into the body of the electronic part. The circuits in this analogue multiplexer number 2. Using the ADG507 search parameter, you can discover variants of the switch. The internal resistance of this digital multiplexer is 300Ohm. For functions related to 28 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Multiplexers should not be powered above 16.5V in normal situations. It is recommended that the electrical component receives a voltage of 10.8V. For this switch, a dual supply voltage is feasible, but it must not exceed 16.5VIn the case of dual power supplies, you should connect at least 10.8V. Integrated with DIFFERENTIAL MULTIPLEXER analog IC. Among the inputs that can be operated are the 16 inputs.

ADG507ATE Features


1 Channels

ADG507ATE Applications


There are a lot of Analog Devices Inc. ADG507ATE Analog Switches & Multiplexers ICs applications.

  • Fiber to the Home
  • Imaging
  • HDTV
  • Battery Powered Systems
  • Relay replacements
  • Audio and video routing
  • DSLAMs
  • Video switching
  • CSU
  • Low-Voltage

Write a review

Note: HTML is not translated!
    Bad           Good