ADG507ATQ
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 28-CDIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 300Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | ADG507 |
| Pin Count | 28 |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Power Dissipation | 470mW |
| Number of Inputs | 16 |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±10.8V~16.5V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 300Ohm |
| Min Dual Supply Voltage | 10.8V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 22pF |
| On-state Resistance Match-Nom | 22.5Ohm |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 15 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 300ns |
| Switch-off Time-Max | 300ns |
| Height Seated (Max) | 5.59mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
ADG507ATQ Overview
The electronic component is convenient to ship overseas because it is packed in a 28-CDIP (0.600, 15.24mm). This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Through Hole is this multiplexer. Multiplexer and demultiplexer circuits have a number 8:1. An extended operating temperature of -55°C~125°C TA degrees Celsius. In total, there are 28 terminations. The electronic part provides high-quality output because it has 1 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. 28 pins are injected to the electronic part body. 2 circuits are used in this analogue multiplexer. ADG507 can be used to search for analog multiplexer variants. This digital multiplexer has 300Ohm internal resistance. Datasheets for functions of 28 pins are available. It is a typical Multiplexer or Switches analog multiplexer. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16.5V. 10.8V is the lowest voltage the electrical component should receive. For this switch, a dual supply voltage is feasible, but it must not exceed 16.5VWith dual power supplies, you should attach at least 10.8V. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. In order to operate the 16 inputs, there are several steps to follow.
ADG507ATQ Features
1 Channels
ADG507ATQ Applications
There are a lot of Analog Devices Inc. ADG507ATQ Analog Switches & Multiplexers ICs applications.
- Industrial
- Sample-and-hold systems
- Intelligent PBX
- Channelized and Unchannelized DS3 applications
- CSU
- Medical systems
- PCMCIA cards
- Audio and video routing
- Audio and video switching
- Avionics and Military Systems
