Parameters |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
NOT APPLICABLE |
Number of Functions |
1 |
Supply Voltage |
15V |
Terminal Pitch |
2.54mm |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
NOT APPLICABLE |
Base Part Number |
ADG508 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Number of Channels |
8 |
Number of Circuits |
1 |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Power Dissipation |
27mW |
Voltage - Supply, Single/Dual (±) |
10.8V~16.5V ±10.8V~16.5V |
Neg Supply Voltage-Nom (Vsup) |
-15V |
On-State Resistance (Max) |
300Ohm |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
68 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
5pF 22pF |
On-state Resistance Match-Nom |
22.5Ohm |
Switch Time (Ton, Toff) (Max) |
300ns, 300ns |
Charge Injection |
4pC |
Channel-to-Channel Matching (ΔRon) |
15 Ω |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
300ns |
Switch-off Time-Max |
300ns |
Signal Current-Max |
0.02A |
Height Seated (Max) |
5.33mm |
Length |
20.07mm |
Width |
7.62mm |
RoHS Status |
Non-RoHS Compliant |
ADG508AKN Overview
Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). High reliability is achieved by using advanced packaging method Tube. In Through Hole, you'll find this switch device. There is 8:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. Total terminations are 16. A 8 channel electronic part produces high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. Electronic part bodies are injected with 16 pins. This multiplexer is composed of 1 circuits. Try searching with ADG508 if you're looking for variants. To find out what the functions of 16 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Integrated with SINGLE-ENDED MULTIPLEXER analog IC.
ADG508AKN Features
8 Channels
ADG508AKN Applications
There are a lot of Analog Devices Inc. ADG508AKN Analog Switches & Multiplexers ICs applications.
- Relay Replacement
- Avionics test equipment
- ATM
- Wireless Local Loop
- Digital access cross connects
- ISDN NT1/TA
- Precision test equipment
- Frame Relay Equipment
- Remote wireless modules
- FTTH