ADG508AKPZ
| Parameters | |
|---|---|
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±10.8V~16.5V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 600 ns |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 300Ohm |
| Min Dual Supply Voltage | 10.8V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 22pF |
| On-state Resistance Match-Nom | 22.5Ohm |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 15 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Drain to Source Resistance | 450Ohm |
| Signal Current-Max | 0.02A |
| Height | 3.68mm |
| Length | 9.04mm |
| Width | 9.04mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 300Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG508 |
| Pin Count | 20 |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 27mW |
| Throw Configuration | DPST |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 600 ns |
ADG508AKPZ Overview
Shipping overseas is convenient due to the electrical component's packing in 20-LCC (J-Lead). To ensure high reliability, a new packaging method Tube is used. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 8:1. The operating temperature is extended to around -40°C~85°C TA. Totally, there are 20 terminations. As a result of its 8 channels, this electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. A total of 20 pins are injected into the electrical part body. 1 circuits are used in this analogue multiplexer. Use ADG508 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 300Ohm. Datasheets for functions of 20 pins are available. The analogue multiplexer in this example is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 16.5V. It is recommended that the electrical component receives a voltage of 10.8V. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 16.5V. If you are using a dual power supply, you should attach at least 10.8V. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. Operating 8 inputs is required. Resistivity from Drain to Source is 450Ohm for this electronic part.
ADG508AKPZ Features
8 Channels
Drain-to-Source resistance: 450Ohm
ADG508AKPZ Applications
There are a lot of Analog Devices Inc. ADG508AKPZ Analog Switches & Multiplexers ICs applications.
- Medical
- HDTV
- Cable Modem
- Frame Relay Equipment
- Industrial
- Avionics and Military Systems
- Video switching
- Routers
- Isolation
- DSLAMs
