Parameters |
Mounting Type |
Surface Mount |
Package / Case |
20-LCC (J-Lead) |
Surface Mount |
YES |
Number of Pins |
20 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Resistance |
300Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
470mW |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
J BEND |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Reach Compliance Code |
unknown |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG508 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
15V |
Number of Channels |
8 |
Number of Circuits |
1 |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
10.8V |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Operating Supply Current |
1.5mA |
Power Dissipation |
27mW |
Throw Configuration |
DPST |
Propagation Delay |
300 ns |
Turn On Delay Time |
450 ns |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
10.8V~16.5V ±10.8V~16.5V |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
450 ns |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
300Ohm |
Min Dual Supply Voltage |
10.8V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
68 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
5pF 22pF |
On-state Resistance Match-Nom |
22.5Ohm |
Switch Time (Ton, Toff) (Max) |
300ns, 300ns |
Charge Injection |
4pC |
Channel-to-Channel Matching (ΔRon) |
15 Ω |
Switching |
BREAK-BEFORE-MAKE |
Signal Current-Max |
0.02A |
Height Seated (Max) |
4.57mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG508AKPZ-REEL Overview
Shipping overseas is convenient with the electronic component packed in 20-LCC (J-Lead). High reliability is ensured by the advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. There is 8:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 20. The electronic part provides high-quality output because it has 8 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. Into the electrical component body are injected 20 pins. It consists of 1 circuits. Try searching with ADG508 to find analog multiplexer variants. The internal resistance of this digital multiplexer is 300Ohm. The datasheets for the 20 pins explain the functions. This switch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16.5V. 10.8V is the lowest voltage the electrical component should receive. This multiplexer would work with 1.5mA current. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 16.5V. When using dual power supplies, you should attach at least 10.8V. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. The electronic component can function from 15V. The 8 inputs need to be operated in order to work.
ADG508AKPZ-REEL Features
8 Channels
1.5mA Supply Current
ADG508AKPZ-REEL Applications
There are a lot of Analog Devices Inc. ADG508AKPZ-REEL Analog Switches & Multiplexers ICs applications.
- Microprocessor Controlled Analog Systems
- Optical Applications
- Precision data acquisition
- High reliability control systems
- Transmit
- ISDN NT1/TA
- T1/E1 Terminals
- Avionics test equipment
- HDTV
- Automotive applications