ADG508AKR-REEL7

300ns, 300ns 300Ohm Analog Switches BREAK-BEFORE-MAKE ADG508 16 Pins 1nA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG508AKR-REEL7
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 348
Description: 300ns, 300ns 300Ohm Analog Switches BREAK-BEFORE-MAKE ADG508 16 Pins 1nA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	700Ohm
Max Power Dissipation	470mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG508
Pin Count	16
Operating Supply Voltage	15V
Number of Channels	8
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	16.5V
Min Supply Voltage	10.8V
Operating Supply Current	600μA
Nominal Supply Current	1.5mA
Power Dissipation	27mW
Max Supply Current	1.5mA
Throw Configuration	DPST
Propagation Delay	300 ns
Turn On Delay Time	450 ns
Logic Function	Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	10.8V~16.5V ±10.8V~16.5V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	450 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	300Ohm
Min Dual Supply Voltage	10.8V
High Level Output Current	20mA
Dual Supply Voltage	12V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	5pF 22pF
On-state Resistance Match-Nom	22.5Ohm
Switch Time (Ton, Toff) (Max)	300ns, 300ns
Charge Injection	4pC
Channel-to-Channel Matching (ΔRon)	15 Ω
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.02A
Height	1.5mm
Length	10mm
Width	4mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADG508AKR-REEL7 Overview

Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 8:1. Operational temperature extended around -40°C~85°C TA. In total, there are 16 terminations. A electrical component with 8 channels is capable of high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. The multiplexer consists of 1 circuits. Try searching for ADG508 variants of the analog switch ic. It has an internal resistance of 700Ohm. For details about the functions of 16 pins, please refer to the datasheets. In normalcircumstances, users should not exceed 16.5V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. 10.8V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 600μA. If put voltage greater than 1.5mA on the device, damage may be caused to the analogue multiplexer. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. In the case of dual power supplies, you should connect at least 10.8V. The electrical part can be operated at 15V voltage levels. The 8 inputs need to be operated in order to work.