Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 2 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
700Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
470mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG508 |
Pin Count |
16 |
Number of Channels |
8 |
Interface |
Parallel |
Number of Circuits |
1 |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
10.8V |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Operating Supply Current |
600μA |
Nominal Supply Current |
1.5mA |
Power Dissipation |
27mW |
Max Supply Current |
1.5mA |
Throw Configuration |
DPST |
Propagation Delay |
300 ns |
Turn On Delay Time |
600 ns |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
10.8V~16.5V ±10.8V~16.5V |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
600 ns |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
300Ohm |
Min Dual Supply Voltage |
10.8V |
High Level Output Current |
20mA |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
68 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
5pF 22pF |
On-state Resistance Match-Nom |
22.5Ohm |
Switch Time (Ton, Toff) (Max) |
300ns, 300ns |
Charge Injection |
4pC |
Channel-to-Channel Matching (ΔRon) |
15 Ω |
Switching |
BREAK-BEFORE-MAKE |
Signal Current-Max |
0.02A |
Height |
1.5mm |
Length |
10mm |
Width |
4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG508AKRZ Overview
Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tube. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 8:1. Extended operating temperature around -40°C~85°C TA. In total, there have been 16 terminations. The electronic part provides high-quality output because it has 8 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. This electronic part can be found in the 16 series. A total of 1 circuits make up this switch device. Try searching with ADG508 to find analog multiplexer variants. A 700Ohm internal resistance characterizes this multiplexer. You can find the functions of the 16 pins in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Users should never supply a voltage higher than 16.5V to a switch device. There should be 10.8V voltage fed to the electrical part below 10.8V. In order to operate this switch device, it would need a current of 600μA. The switch multiplexer may be damaged if it is exposed to voltage greater than 1.5mA. There is no problem with using dual supply voltage, but it should not exceed 16.5V. The voltage should be at least 10.8V if you are using dual power supplies. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. Among the inputs that can be operated are the 8 inputs.
ADG508AKRZ Features
8 Channels
600μA Supply Current
ADG508AKRZ Applications
There are a lot of Analog Devices Inc. ADG508AKRZ Analog Switches & Multiplexers ICs applications.
- Remote Powered Equipment
- Relay replacements
- Power routing
- Avionics
- Mechanical reed relay replacement
- Precision data acquisition
- Avionics and Military Systems
- Microprocessor controlled systems
- Sample hold systems
- Multi-Line E1 Interface Cards