ADG508AKRZ-REEL
| Parameters | |
|---|---|
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±10.8V~16.5V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 450 ns |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 300Ohm |
| Min Dual Supply Voltage | 10.8V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 22pF |
| On-state Resistance Match-Nom | 22.5Ohm |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 15 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 300Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG508 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Operating Supply Current | 600μA |
| Power Dissipation | 27mW |
| Throw Configuration | DPST |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 450 ns |
ADG508AKRZ-REEL Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Surface Mount is where this multiplexer is located. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Operating temperature extended to -40°C~85°C TA. There are 16 terminations totally. A 8 channel electronic part produces high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. There is an electrical component included in the 16 series. The multiplexer consists of 1 circuits. Try searching with ADG508 if you're looking for variants. It has an internal resistance of 300Ohm. For functions related to 16 pins, please refer to the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 16.5V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. It is recommended to use 10.8V as the lowest voltage for the electrical part. For this digital switch to work, 600μA current would suffice. For this switch, a dual supply voltage is feasible, but it must not exceed 16.5VIn the case of dual power supplies, you should connect at least 10.8V. This electrical part is compatible with 15V operating voltages. In order to operate the 8 inputs, there are several steps to follow.
ADG508AKRZ-REEL Features
8 Channels
600μA Supply Current
ADG508AKRZ-REEL Applications
There are a lot of Analog Devices Inc. ADG508AKRZ-REEL Analog Switches & Multiplexers ICs applications.
- DSUs
- Precision test equipment
- Fiber to the Home
- Public switching systems
- High reliability control systems
- Cross Connects
- Intelligent PBX
- DVD-R
- Remote wireless modules
- Residential Gateways, Home Gateway/Router
