Parameters |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
270Ohm |
Additional Feature |
ACTIVE OVERVOLTAGE PROTECTION |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
3.3mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG508 |
Pin Count |
16 |
Number of Channels |
8 |
Interface |
Parallel |
Number of Circuits |
1 |
Max Supply Voltage |
15V |
Min Supply Voltage |
-15V |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Power Dissipation |
3mW |
Max Supply Current |
1μA |
Throw Configuration |
DPST |
Turn On Delay Time |
230 ns |
Number of Inputs |
8 |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
130 ns |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
270Ohm Typ |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
93 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
3pF 22pF |
On-state Resistance Match-Nom |
8.1Ohm |
Switch Time (Ton, Toff) (Max) |
230ns, 130ns |
Charge Injection |
15pC |
Channel-to-Channel Matching (ΔRon) |
8.1 Ω |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
300ns |
Signal Current-Max |
0.02A |
Voltage - Supply, Dual (V±) |
±15V |
Length |
9.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
ADG508FBRN Overview
Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. To ensure high reliability, a new packaging method Tube is used. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 8:1. Increasing operating temperature to around -40°C~85°C TA. Totally, there are 16 terminations. A electrical component with 8 channels is capable of high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. This electrical component is included in the 16 series of products. It consists of 1 circuits. Try searching for ADG508 variants of the analog switch ic. Analog switches have 270Ohm internal resistance. Datasheets for 16 pin functions are available upon request. There is a standard Multiplexer or Switches analogue multiplexer here. Users should never supply a voltage higher than 15V to a switch device. It is recommended that the electrical component receives a voltage of -15V. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. Despite this switch's dual supply capability, its voltage should not exceed 22V. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. Among the inputs that can be operated are the 8 inputs. Additional features include: ACTIVE OVERVOLTAGE PROTECTION.
ADG508FBRN Features
8 Channels
Additional Features: ACTIVE OVERVOLTAGE PROTECTION
ADG508FBRN Applications
There are a lot of Analog Devices Inc. ADG508FBRN Analog Switches & Multiplexers ICs applications.
- Routers
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Multiplexers
- Public switching systems
- Microprocessor Controlled Analog Systems
- Signal routing between systems
- Remote Powered Equipment
- Medical
- USB 1.1 signal switching circuits
- Battery Powered Instruments