ADG508FBRNZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 270Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 3.3mW |
| Base Part Number | ADG508 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Operating Supply Current | 100nA |
| Power Dissipation | 3mW |
| Max Supply Current | 1μA |
| Throw Configuration | DPST |
| Turn On Delay Time | 230 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 15V ±15V |
| Supply Type | Dual |
| Turn-Off Delay Time | 130 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 270Ohm Typ |
| High Level Output Current | 20mA |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 22pF |
| Switch Time (Ton, Toff) (Max) | 230ns, 130ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 8.1Ohm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG508FBRNZ-REEL7 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have the same number of circuits 8:1. Operating temperature extended to -40°C~85°C TA. As a result of its 1 channels, this electronic component provides high-quality output. A 1 circuit is present in this switch device. Try searching for ADG508 variants of the analog switch ic. The internal resistance of this digital multiplexer is 270Ohm. For functions related to 16 pins, please refer to the datasheets. A voltage higher than 16.5V should not normally be supplied to the switches. Analogue multiplexer with a Dual supply type that is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 10.8V. An operating current of 100nA would be sufficient for this switch device. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. This electrical part is compatible with 15V operating voltages. Operating the 8 inputs requires 8 inputs. Temperatures above 85°C should not be used to operate the switches. The analog switch ics has 1 outputs. 16-SOIC package is offered by suppliers.
ADG508FBRNZ-REEL7 Features
1 Channels
100nA Supply Current
ADG508FBRNZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG508FBRNZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Communications systems
- Audio signal routing
- Wireless Local Loop
- Medical Instrumentation
- Mechanical reed relay replacement
- Digital access cross connects
- Microwave transmission systems
- Industrial and process control systems
- USB 1.1 signal switching circuits
- 65 V DACs
